Laser marking (traceability code)
Laser marking (traceability code) capability for titanium components
What is Laser marking (traceability code)?
Laser marking (traceability code) capability for titanium components
Laser processing capability for Laser marking (traceability code), with precision beam delivery, gas assist systems, and process monitoring for repeatable quality.
Engineering Parameters & Capabilities
Fiber laser marking on titanium produces high-contrast, permanent identification marks by controlled surface oxidation or micro-engraving. UDI codes, serial numbers, 2D DataMatrix codes, and logos are marked without into the material, preserving structural integrity, specifically for titanium components. Precision titanium components present unique challenges: Balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM vs. laser) optimized for each feature.
| Parameter | Specification |
|---|---|
| Marking Method | Surface oxidation / micro-engraving |
| Depth | 5–50 µm (engraving mode) |
| Readability | High contrast; permanent; readable after anodizing |
| Speed | Up to 10,000 characters/min (galvo scanner) |
Engineering Capabilities & Limits
Laser processing capability for Laser marking (traceability code), with precision beam delivery, gas assist systems, and process monitoring for repeatable quality.
Hole Types Supported
Heat Control Measures
Pulsed nanosecond fiber laser with galvo scanner. Marking depth controlled by pulse energy and repetition rate; no bulk heating of the component.
Flatness & Stress Relief
Non-contact process — no mechanical force applied. Focal distance maintained within ±0.5 mm across marking field via autofocus.
Tolerance
Marking depth: 5–50 µm; line width 0.05–0.5 mm
Secondary Operations & Downstream Processing
Enhance your component with our integrated downstream services:
Contrast Verification
Barcode/DataMatrix grade verification per ISO/IEC 15415.
Deburring
Deburring for laser marking (traceability code) components.
Dimensional Inspection
Dimensional Inspection for laser marking (traceability code) components.
Surface Treatment as Required
Surface Treatment as Required for laser marking (traceability code) components.
Quality Assurance & Inspection
Inspection Items
- Laser marking (traceability code) specific dimensional verification (CMM / vision)
- Material grade verification (PMI / OES spectrometer)
Quality Standards & Certifications
- ISO 9001:2015 — Quality Management System
- AS9100D — Aerospace Quality Management
- ASTM B265 — Titanium Strip, Sheet, and Plate Standard
Frequently Asked Questions
What titanium grades are suitable for Laser marking (traceability code)?
What tolerances can be achieved with Laser marking (traceability code)?
What quality certifications apply to Laser marking (traceability code)?
What is the typical lead time for Laser marking (traceability code) projects?
Can you provide DFM feedback for my Laser marking (traceability code) design?
Related Laser Processing Capabilities
Other capabilities in the same category.
EB / laser welding of rib-skin assembly
EB / laser welding of rib-skin assembly capability for titanium components
Laser cutting + die stamping of crampon spikes
Laser cutting + die stamping of crampon spikes capability for titanium components
Laser cutting of port holes
Laser cutting of port holes capability for titanium components
Laser marking (UDI code)
Laser marking (UDI code) capability for titanium components
Laser engraving (marking)
Laser engraving (marking) capability for titanium components
Laser marking
Laser marking capability for titanium components
Laser micro-cutting of tube
Laser micro-cutting of tube capability for titanium components
Laser micro-drilling of orifice disks
Laser micro-drilling of orifice disks capability for titanium components
Laser or waterjet cutting of perforated bottom plates
Laser or waterjet cutting of perforated bottom plates capability for titanium components
Laser/perforation drilling of sparger pipes
Laser/perforation drilling of sparger pipes capability for titanium components
Laser / plasma cutting of plate
Laser / plasma cutting of plate capability for titanium components
Laser / waterjet cutting
Laser / waterjet cutting capability for titanium components
One Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.