Laser / plasma cutting of plate
Laser / plasma cutting of plate capability for titanium components
What is Laser / plasma cutting of plate?
Laser / plasma cutting of plate capability for titanium components
Laser processing capability for Laser / plasma cutting of plate, with precision beam delivery, gas assist systems, and process monitoring for repeatable quality.
Engineering Parameters & Capabilities
Fiber laser cutting of titanium uses a focused 1 µm wavelength beam to melt and expel material through a coaxial assist gas jet. The narrow (0.1–0.3 mm) and small heat-affected zone make it suitable for precision profiles in sheet and thin-plate titanium components.
| Parameter | Primary Method | Alternative Method |
|---|---|---|
| Cut Speed (3 mm Ti) | Up to 6 m/min | 0.5–1.5 m/min |
| Kerf Width | 0.1–0.3 mm | 0.7–1.2 mm |
| HAZ | 0.05–0.15 mm with N₂ assist | Zero HAZ (cold cut) |
| Max Thickness | 15 mm (fiber laser) | 100 mm+ |
Engineering Capabilities & Limits
Laser processing capability for Laser / plasma cutting of plate, with precision beam delivery, gas assist systems, and process monitoring for repeatable quality.
Hole Types Supported
Heat Control Measures
Coaxial N₂ (99.999%) assist gas at 12–20 bar prevents titanium oxidation by displacing oxygen. Laser power modulation controls heat input to minimize HAZ to 0.05–0.15 mm.
Flatness & Stress Relief
Large surface area prone to vibration. Vacuum fixture with gasket sealing; fly-cutting strategy with < 0.02 mm flatness over 1000 mm.
Tolerance
±0.05 mm (thin sheet < 3 mm) / ±0.1 mm (plate 3–12 mm)
Typical Applications & Components
This process is used to manufacture the following titanium components.
Secondary Operations & Downstream Processing
Enhance your component with our integrated downstream services:
Deburring
Drag finishing or chemical deburring to remove laser-cut dross.
Pickling & Passivation
Nitric-HF acid bath (ASTM B600) to remove heat tint.
Stress Relief Annealing
Stress Relief Annealing for laser / plasma cutting of plate components.
Laser/Waterjet Trimming
Laser/Waterjet Trimming for laser / plasma cutting of plate components.
Flatness Inspection
Flatness Inspection for laser / plasma cutting of plate components.
Quality Assurance & Inspection
Inspection Items
- Laser / plasma cutting of plate specific dimensional verification (CMM / vision)
- Material grade verification (PMI / OES spectrometer)
- Fluorescent Penetrant Inspection (FPI) per ASTM E1417
Quality Standards & Certifications
- ISO 9001:2015 — Quality Management System
- AS9100D — Aerospace Quality Management
- ASTM B265 — Titanium Strip, Sheet, and Plate Standard
Frequently Asked Questions
What titanium grades are suitable for Laser / plasma cutting of plate?
What tolerances can be achieved with Laser / plasma cutting of plate?
What quality certifications apply to Laser / plasma cutting of plate?
What is the typical lead time for Laser / plasma cutting of plate projects?
Can you provide DFM feedback for my Laser / plasma cutting of plate design?
Related Laser Processing Capabilities
Other capabilities in the same category.
EB / laser welding of rib-skin assembly
EB / laser welding of rib-skin assembly capability for titanium components
Laser cutting + die stamping of crampon spikes
Laser cutting + die stamping of crampon spikes capability for titanium components
Laser cutting of port holes
Laser cutting of port holes capability for titanium components
Laser engraving (marking)
Laser engraving (marking) capability for titanium components
Laser marking (traceability code)
Laser marking (traceability code) capability for titanium components
Laser marking (UDI code)
Laser marking (UDI code) capability for titanium components
Laser marking
Laser marking capability for titanium components
Laser micro-cutting of tube
Laser micro-cutting of tube capability for titanium components
Laser micro-drilling of orifice disks
Laser micro-drilling of orifice disks capability for titanium components
Laser or waterjet cutting of perforated bottom plates
Laser or waterjet cutting of perforated bottom plates capability for titanium components
Laser/perforation drilling of sparger pipes
Laser/perforation drilling of sparger pipes capability for titanium components
Laser / waterjet cutting
Laser / waterjet cutting capability for titanium components
One Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.