Laser cutting of port holes
Laser cutting of port holes capability for titanium components
What is Laser cutting of port holes?
Laser cutting of port holes capability for titanium components
Laser processing capability for Laser cutting of port holes, with precision beam delivery, gas assist systems, and process monitoring for repeatable quality.
Engineering Parameters & Capabilities
Fiber laser cutting of titanium uses a focused 1 µm wavelength beam to melt and expel material through a coaxial assist gas jet. The narrow (0.1–0.3 mm) and small heat-affected zone make it suitable for precision profiles in sheet and thin-plate titanium components.
| Parameter | Primary Method | Alternative Method |
|---|---|---|
| Cut Speed (3 mm Ti) | Up to 6 m/min | 0.5–1.5 m/min |
| Kerf Width | 0.1–0.3 mm | 0.7–1.2 mm |
| HAZ | 0.05–0.15 mm with N₂ assist | Zero HAZ (cold cut) |
| Max Thickness | 15 mm (fiber laser) | 100 mm+ |
Engineering Capabilities & Limits
Laser processing capability for Laser cutting of port holes, with precision beam delivery, gas assist systems, and process monitoring for repeatable quality.
Hole Types Supported
Heat Control Measures
Coaxial N₂ (99.999%) assist gas at 12–20 bar prevents titanium oxidation by displacing oxygen. Laser power modulation controls heat input to minimize HAZ to 0.05–0.15 mm.
Flatness & Stress Relief
Thin-gauge titanium (< 2 mm) may release residual stress during cutting, causing distortion. Vacuum annealing stress relief at 540–650°C and roller leveling available.
Tolerance
±0.05 mm (thin sheet < 3 mm) / ±0.1 mm (plate 3–12 mm)
Secondary Operations & Downstream Processing
Enhance your component with our integrated downstream services:
Deburring
Drag finishing or chemical deburring to remove laser-cut dross.
Pickling & Passivation
Nitric-HF acid bath (ASTM B600) to remove heat tint.
Dimensional Inspection
Dimensional Inspection for laser cutting of port holes components.
Surface Treatment as Required
Surface Treatment as Required for laser cutting of port holes components.
Quality Assurance & Inspection
Inspection Items
- Laser cutting of port holes specific dimensional verification (CMM / vision)
- Material grade verification (PMI / OES spectrometer)
Quality Standards & Certifications
- ISO 9001:2015 — Quality Management System
- AS9100D — Aerospace Quality Management
- ASTM B265 — Titanium Strip, Sheet, and Plate Standard
Frequently Asked Questions
What titanium grades are suitable for Laser cutting of port holes?
What tolerances can be achieved with Laser cutting of port holes?
What quality certifications apply to Laser cutting of port holes?
What is the typical lead time for Laser cutting of port holes projects?
Can you provide DFM feedback for my Laser cutting of port holes design?
Related Laser Processing Capabilities
Other capabilities in the same category.
EB / laser welding of rib-skin assembly
EB / laser welding of rib-skin assembly capability for titanium components
Laser cutting + die stamping of crampon spikes
Laser cutting + die stamping of crampon spikes capability for titanium components
Laser marking (traceability code)
Laser marking (traceability code) capability for titanium components
Laser marking (UDI code)
Laser marking (UDI code) capability for titanium components
Laser engraving (marking)
Laser engraving (marking) capability for titanium components
Laser marking
Laser marking capability for titanium components
Laser micro-cutting of tube
Laser micro-cutting of tube capability for titanium components
Laser micro-drilling of orifice disks
Laser micro-drilling of orifice disks capability for titanium components
Laser or waterjet cutting of perforated bottom plates
Laser or waterjet cutting of perforated bottom plates capability for titanium components
Laser/perforation drilling of sparger pipes
Laser/perforation drilling of sparger pipes capability for titanium components
Laser / plasma cutting of plate
Laser / plasma cutting of plate capability for titanium components
Laser / waterjet cutting
Laser / waterjet cutting capability for titanium components
One Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.