BOZE CNC Ti | Surface Treatment

Anodizing

Anodizing capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
Tank: 1200 × 800 × 600 mm; all part sizes Thickness Range
Coating: 0.5–5 µm (Type II) / 5–25 µm (Type III); no dimensional change Cutting Tolerance
Coating: 0.5–5 µm (Type II) / 5–25 µm (Type III); no dimensional change Tolerance
Retains substrate finish; matte to satin appearance Surface Finish

What is Anodizing?

Anodizing capability for titanium components

Surface engineering capability for Anodizing, with process control, bath chemistry monitoring, and batch consistency validation.

Engineering Parameters & Capabilities

Titanium anodizing (AMS 2488) grows a controlled oxide layer through electrochemical conversion in an electrolyte bath. Type II produces interference colors (gold, blue, purple, green) for identification and cosmetics. Type III (hard anodizing) produces a thicker, abrasion-resistant oxide, specifically for titanium components. Precision titanium components present unique challenges: Balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM vs. laser) optimized for each feature.

Parameter Specification
Coating Electrochemical oxide conversion; not a deposit
Thickness Type II: 0.5–5 µm / Type III: 5–25 µm
Colors Gold (15V), blue (40V), green (70V), purple (90V)

Engineering Capabilities & Limits

Surface engineering capability for Anodizing, with process control, bath chemistry monitoring, and batch consistency validation.

Hole Types Supported

N/A

Heat Control Measures

Electrolyte bath at 20–24°C (Type II) or –5–0°C (Type III). Voltage ramp programmed to prevent localized overheating and burning.

Flatness & Stress Relief

No dimensional change — surface conversion only. Pre-treatment finish is preserved through the process.

Tolerance

Coating: 0.5–5 µm (Type II) / 5–25 µm (Type III); no dimensional change

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Sealing

Hot water or nickel acetate sealing to close micro-porosity.

Laser Marking

Post-anodize laser marking for UDI or part ID on oxide layer.

Deburring

Deburring for anodizing components.

Dimensional Inspection

Dimensional Inspection for anodizing components.

Surface Treatment as Required

Surface Treatment as Required for anodizing components.

Quality Assurance & Inspection

Inspection Items

  • Anodizing specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for Anodizing?
Anodizing can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with Anodizing?
Typical achievable tolerances for Anodizing are Coating: 0.5–5 µm (Type II) / 5–25 µm (Type III); no dimensional change. Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to Anodizing?
All Anodizing operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for Anodizing projects?
Lead times for Anodizing vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my Anodizing design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Systems Requiring This Capability

3 product systems that depend on Anodizing.

💻

MOCVD Wafer Susceptor & Support Hardware

Large-diameter disk/susceptor (up to 300mm) with pocket recesses for wafers, support arms with preci

1 components

💻

Semiconductor Process Chamber Components

Large diameter rings, liner shields, focus rings, clamp rings, gas distribution plates — thin-wall,

3 components

📱

Smartphone Mid-Frame & Structural Chassis

Large thin-walled perimeter frame with complex internal ribbing, threaded inserts, antenna bands, an

Related Surface Treatment Capabilities

Other capabilities in the same category.

Anodizing (AMS 2488)

Anodizing (AMS 2488) capability for titanium components

Anodizing (colors)

Anodizing (colors) capability for titanium components

Anodizing/DLC coating

Anodizing/DLC coating capability for titanium components

Bead blasting / anodizing / PVD

Bead blasting / anodizing / PVD capability for titanium components

Cleaning & passivation

Cleaning & passivation capability for titanium components

Coating (if required)

Coating (if required) capability for titanium components

Cryogenic polishing for medical sonotrodes

Cryogenic polishing for medical sonotrodes capability for titanium components

DLC coating for wear resistance

DLC coating for wear resistance capability for titanium components

DLC coating (wear resistance)

DLC coating (wear resistance) capability for titanium components

Electrochemical polishing

Electrochemical polishing capability for titanium components

Electropolishing + Class 100 ultrasonic cleaning

Electropolishing + Class 100 ultrasonic cleaning capability for titanium components

Electropolishing of all vacuum-facing surfaces

Electropolishing of all vacuum-facing surfaces capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities