Titanium Thru-Axle is a lightweight quickrelease thruaxle shaft component engineered for Quick-release thru-axle shaft for wheel retention. Forged and CNC machined from Grade 5 Ti-6Al-4V, it achieves 40-45% weight savings versus steel while maintaining the fatigue life required for demanding cycling applications. Threaded interfaces are designed to prevent galling in outdoor environments.
Titanium Thru-Axle
| Technical Parameter | Specification |
|---|---|
| Component SKU | TI-CYC-WHEE-TITANI |
| Standards & Specifications | MIL-STD-810HASTM B117 |
| Surface Finish | PVD TiAlN coating (2-3um, HV2500) |
Titanium Thru-Axle
Quick-release thru-axle shaft for wheel retention
| Technical Parameter | Specification Value |
|---|---|
| International Compliance | MIL-STD-810H, ASTM B117 |
| Surface Finish & Max Temp | PVD TiAlN coating (2-3um, HV2500) |
| NDT & Quality Control | Ultrasonic Testing (UT) per ASTM A388; Liquid Penetrant Inspection (LPI) per ASTM E1417; Dimensional verification via CMM |
- • 100% Traceability: Mill Test Certificate (EN 10204 3.1) with heat analysis & mechanical testing.
- • NDT Verification: Ultrasonic Testing (UT) per ASTM A388; Liquid Penetrant Inspection (LPI) per ASTM E1417; Dimensional verification via CMM.
- • Compliance: REACH, RoHS 3 certified. FAI AS9102 available.
- • Process: 5-axis CNC contouring , electropolishing , ultrasonic clean , vision inspection .
- • Thermal Stress Relief: Post-machining vacuum annealing (540-675°C under Argon) reduces distortion risk >70%.
- • Rolled Threads: Thread rolling (not cutting) increases fatigue limits by 30-50%.
Q: Does Titanium Thru-Axle require special assembly or anti-seize? ▼
Yes. Titanium-to-titanium threaded interfaces on Titanium Thru-Axle are susceptible to galling (cold welding) during assembly. Application of MoS₂ or copper-based anti-seize compound to all threaded contact surfaces is mandatory. Lubricated installation torque values are typically 15-20% lower than dry values. Thread engagement should not exceed 3× thread diameter.
Q: What is the typical lead time for Titanium Thru-Axle orders? ▼
Standard lead time for Titanium Thru-Axle is 15-25 business days depending on quantity and complexity. Rush orders (3-5 working days) are available for prototype evaluation. Sample evaluation (1-5 units) can be expedited to 5-7 business days. Volume pricing is available for production quantities above 100 units.
Q: What material certifications are provided with Titanium Thru-Axle? ▼
Each Titanium Thru-Axle shipment includes EN 10204 Type 3.1 mill test certificate with chemical analysis, mechanical properties, and heat identification. Dimensional inspection reports and Certificate of Conformance (CoC) are standard. First Article Inspection Reports (FAIR) per AS9102 are available on request for quickrelease thruaxle shaft.
§ Why Grade 5 Ti-6Al-4V for quickrelease thruaxle shaft
Function
Engineered as a Wheel Hardware component, this part serves the specific function of . Grade 5 Ti-6Al-4V was selected for its proven performance in Cycling / Bicycle service conditions.
Specifications
- SKU: TI-CYC-WHEE-TITANI
- Category: Wheel Hardware
- Industry: Cycling / Bicycle
- Material: Grade 5 Ti-6Al-4V
- Process: 5-axis CNC contouring , electropolishing , ultrasonic clean , vision inspection
- Weight: Weight optimized through topology analysis - 30% lighter than baseline
§ Fatigue & Dimensional Inspection Protocol
Quality Management
Quality system compliant with ISO 9001:2015. Each Titanium Thru-Axle batch includes full material traceability, dimensional inspection results, and a Certificate of Conformity (CoC).
Inspection & NDT
Vision-based optical inspection for surface defects; helium leak testing for sealed interfaces; eddy current surface crack detection on high-stress areas
§ Lightweight Component Manufacturing Process
Titanium Thru-Axle is manufactured using 5-axis CNC contouring , electropolishing , ultrasonic clean , vision inspection . Each operation is performed by certified machinists with real-time process monitoring and dimensional verification at critical stages. Heat code traceability is maintained throughout all production steps.
Commercial Logistics & Procurement Framework
Pricing and lead times for Titanium Thru-Axle are batch-dependent. Contact our supply chain team for volume-based tiered pricing.
Regulatory & Quality Assurance Ledger
Verifiable certifications for Titanium Thru-Axle
Material Test Certificate (MTC)
EN 10204 3.1
Environmental Compliance
REACH (EC No 1907/2006)
Restricted Substances
RoHS 3 Directive (2015/863/EU)
Dimensional Tolerances
ISO 2768-m
Standard: MIL-STD-810H
MIL-STD-810H
Standard: ASTM B117
ASTM B117
Systems Interconnectivity & Topology
Cross-functional integration matrix for Tier-1 supply chains and assembly orchestration.
- ▸ Platform Interface Plate
- ▸ System Integration Frame
Titanium Thru-Axle
Material: Grade 5 Ti-6Al-4V
SKU: TI-CYC-WHEE-TITANI
Industry: Cycling / Bicycle / System: Bicycle Wheels, Saddle, Pedals & Accessories
- ▸ Retention Clip Assembly
- ▸ Compression Spring Set
- ▸ Installation Tool
Custom Titanium Part
Ready to manufacture Titanium Thru-Axle (SKU: TI-CYC-WHEE-TITANI)? Contact our engineering team for a custom solution.
Custom Titanium PartOne Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze Titanium Manufacturing Center is operated by Baoji Boze Metal Products Co., Ltd.
Certifications verified by NADCAP and compliant with ASTM International titanium standards (B265, B348, B381, F136, F2924) and ISO 13485 medical-device QMS.