Titanium Shadow Ring Bracket is an ultra-clean arcshaped shadow ring component designed for Arc-shaped shadow ring support bracket. Manufactured from Grade 2 CP-Ti with Class 100 cleanroom protocols, it provides the non-magnetic, low-outgassing, and particle-free performance essential for wafer fabrication environments.
Titanium Shadow Ring Bracket
| Technical Parameter | Specification |
|---|---|
| Component SKU | TI-SEM-CHA-SHADOW |
| Standards & Specifications | ASTM B348 |
| Surface Finish | Passivation ASTM F86 (20-30% HNO3, 30min @50C) |
Titanium Shadow Ring Bracket
Arc-shaped shadow ring support bracket
| Technical Parameter | Specification Value |
|---|---|
| International Compliance | ASTM B348 |
| Surface Finish & Max Temp | Passivation ASTM F86 (20-30% HNO3, 30min @50C) |
| NDT & Quality Control | Helium Mass Spectrometry Leak Detection per ASTM E493 (<1e-9 mbar·L/s); Particle Count Verification per SEMI E98 (Class 100); Surface Profilometry per ISO 4287 (Ra verification); Positive Material Identification (PMI) via XRF per ASTM E1476; Dimensional verification via CMM per ISO 10360 |
- • 100% Traceability: Mill Test Certificate (EN 10204 3.1) with heat analysis & mechanical testing.
- • NDT Verification: Helium Mass Spectrometry Leak Detection per ASTM E493 (<1e-9 mbar·L/s); Particle Count Verification per SEMI E98 (Class 100); Surface Profilometry per ISO 4287 (Ra verification); Positive Material Identification (PMI) via XRF per ASTM E1476; Dimensional verification via CMM per ISO 10360.
- • Compliance: REACH, RoHS 3 certified. FAI AS9102 available.
- • Process: CNC precision machining, vacuum stress relief, thread rolling, surface passivation.
- • Thermal Stress Relief: Post-machining vacuum annealing (540-675°C under Argon) reduces distortion risk >70%.
- • Rolled Threads: Thread rolling (not cutting) increases fatigue limits by 30-50%.
Q: What outgassing properties does Titanium Shadow Ring Bracket have in vacuum environments? ▼
Grade 2 CP-Ti exhibits outgassing rates below 1×10⁻¹² Torr·L/s·cm² after bake-out at 200°C for 4 hours, compliant with SEMI F3 and ASTM E595 requirements. Total mass loss (TML) <0.1% and collected volatile condensable materials (CVCM) <0.01% per ASTM E595. This makes Titanium Shadow Ring Bracket suitable for arcshaped shadow ring in UHV processing chambers down to 1×10⁻¹⁰ Torr.
Q: What is the typical lead time for Titanium Shadow Ring Bracket orders? ▼
Standard lead time for Titanium Shadow Ring Bracket is 15-25 business days depending on quantity and complexity. Rush orders (3-5 working days) are available for prototype evaluation. Sample evaluation (1-5 units) can be expedited to 5-7 business days. Volume pricing is available for production quantities above 100 units.
Q: What material certifications are provided with Titanium Shadow Ring Bracket? ▼
Each Titanium Shadow Ring Bracket shipment includes EN 10204 Type 3.1 mill test certificate with chemical analysis, mechanical properties, and heat identification. Dimensional inspection reports and Certificate of Conformance (CoC) are standard. First Article Inspection Reports (FAIR) per AS9102 are available on request for arcshaped shadow ring.
§ Grade 2 CP-Ti Selection for arcshaped shadow ring
Function
Designed for Semiconductor applications, this component fulfills the role of . The use of Grade 2 CP-Ti (Bead Blasted) ensures long-term reliability in this Chamber Shield configuration.
Specifications
- SKU: TI-SEM-CHA-SHADOW
- Category: Chamber Shield
- Industry: Semiconductor
- Material: Grade 2 CP-Ti (Bead Blasted)
- Process: CNC precision machining, vacuum stress relief, thread rolling, surface passivation
- Weight: 35-45% lighter than steel equivalents at equivalent section modulus
§ UHV Particle & Surface Contamination Verification
Quality Management
Manufactured under ISO 9001:2015 with full EN 10204 Type 3.1 material traceability from ingot to finished Titanium Shadow Ring Bracket. All critical features are CMM-verified and documented in the First Article Inspection Report.
Inspection & NDT
100% CMM dimensional inspection per ISO 10360 on critical features; surface roughness verification per ISO 4287; material grade verification via PMI
§ Cleanroom Manufacturing & Finishing Process
Titanium Shadow Ring Bracket is manufactured using cnc precision machining, vacuum stress relief, thread rolling, surface passivation. Each operation is performed by certified machinists with real-time process monitoring and dimensional verification at critical stages. Heat code traceability is maintained throughout all production steps.
Commercial Logistics & Procurement Framework
Pricing and lead times for Titanium Shadow Ring Bracket are batch-dependent. Contact our supply chain team for volume-based tiered pricing.
Regulatory & Quality Assurance Ledger
Verifiable certifications for Titanium Shadow Ring Bracket
Material Test Certificate (MTC)
EN 10204 3.1
Environmental Compliance
REACH (EC No 1907/2006)
Restricted Substances
RoHS 3 Directive (2015/863/EU)
Quality Management System
ISO 9001:2015
Dimensional Tolerances
ISO 2768-m
Standard: ASTM B348
Systems Interconnectivity & Topology
Cross-functional integration matrix for Tier-1 supply chains and assembly orchestration.
- ▸ Primary Assembly Integration
- ▸ Subsystem Mounting Interface
Titanium Shadow Ring Bracket
Material: Grade 2 CP-Ti (Bead Blasted)
SKU: TI-SEM-CHA-SHADOW
Industry: Semiconductor / System: Plasma Chamber Liners, Shields & Thermal Hardware
- ▸ Fastener Kit A
- ▸ Sealing Gasket
- ▸ Protective Cover
Request Enterprise Pricing
Fill out the form below and our team will respond within 24 hours with a tailored quotation for Titanium Shadow Ring Bracket (SKU: TI-SEM-CHA-SHADOW).
Related Knowledge
Material
Grade 2 CP-Ti
Capability
Electropolishing + Class 100 ultrasonic cleaning
Surface Treatment
Capability
Electropolishing of all vacuum-facing surfaces
Surface Treatment
Capability
Electropolishing of all wetted surfaces
Surface Treatment
System
Plasma Chamber Liners, Shields & Thermal Hardware
Need titanium shadow ring bracket for your semiconductor process tool? Send your specifications — our cleanroom manufacturing team responds within 24 hours.
Request UHV Manufacturing Quote for Titanium Shadow Ring BracketOne Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.