Gun-drilling of intramedullary nails + cannulated screws
Gun-drilling of intramedullary nails + cannulated screws capability for titanium components
What is Gun-drilling of intramedullary nails + cannulated screws?
Gun-drilling of intramedullary nails + cannulated screws capability for titanium components
Integrated manufacturing capability for Gun-drilling of intramedullary nails + cannulated screws, supported by in-house QC, material certification, and engineering review.
Engineering Parameters & Capabilities
Laser drilling of titanium uses pulsed laser energy to create precise holes through percussion or trepanning methods. Hole diameters range from 0.05 mm to 3 mm with aspect ratios up to 20:1, specifically for screw. Precision screw for Fastener present unique challenges: Thread form accuracy per ASME B1.1 with Class 3A fit. Micro-screws (< M2) require Swiss turning with CBN tooling.
| Parameter | Primary Method | Alternative Method |
|---|---|---|
| Hole Diameter | 0.05-3 mm | 0.5 mm min (abrasive) |
| Aspect Ratio | Up to 20:1 | 3:1 |
| Speed | 0.1-2 sec/hole (percussion) | N/A |
Engineering Capabilities & Limits
Integrated manufacturing capability for Gun-drilling of intramedullary nails + cannulated screws, supported by in-house QC, material certification, and engineering review.
Hole Types Supported
Heat Control Measures
Pulsed fiber laser with nitrogen assist gas. Pulse energy and frequency controlled to minimize recast layer.
Flatness & Stress Relief
Non-contact process; no mechanical distortion. Vacuum fixturing for thin foil.
Tolerance
Class 3A thread fit; +0.005 mm on shank diameter
Typical Applications & Components
This process is used to manufacture the following titanium components.
Secondary Operations & Downstream Processing
Enhance your component with our integrated downstream services:
Recast Removal
Chemical etching to remove laser recast layer.
Thread Rolling
Thread Rolling for gun-drilling of intramedullary nails + cannulated screws components.
Passivation
Passivation for gun-drilling of intramedullary nails + cannulated screws components.
Go/No-Go Gauge Inspection
Go/No-Go Gauge Inspection for gun-drilling of intramedullary nails + cannulated screws components.
Quality Assurance & Inspection
Inspection Items
- Gun-drilling of intramedullary nails + cannulated screws specific dimensional verification (CMM / vision)
- Material grade verification (PMI / OES spectrometer)
Quality Standards & Certifications
- ISO 9001:2015 — Quality Management System
- AS9100D — Aerospace Quality Management
- ASTM B265 — Titanium Strip, Sheet, and Plate Standard
Frequently Asked Questions
What titanium grades are suitable for Gun-drilling of intramedullary nails + cannulated screws?
What tolerances can be achieved with Gun-drilling of intramedullary nails + cannulated screws?
What quality certifications apply to Gun-drilling of intramedullary nails + cannulated screws?
What is the typical lead time for Gun-drilling of intramedullary nails + cannulated screws projects?
Can you provide DFM feedback for my Gun-drilling of intramedullary nails + cannulated screws design?
Related General Manufacturing Capabilities
Other capabilities in the same category.
100% crack detection
100% crack detection capability for titanium components
3.1 MTC with VAR ingot traceability per ASME Section VIII
3.1 MTC with VAR ingot traceability per ASME Section VIII capability for titanium components
5-axis machining center
5-axis machining center capability for titanium components
7-stage UHP cleanroom wash for hydrogen fuel cell components
7-stage UHP cleanroom wash for hydrogen fuel cell components capability for titanium components
Adaptive machining
Adaptive machining capability for titanium components
Accelerated aging test (1000h)
Accelerated aging test (1000h) capability for titanium components
AF temperature measurement (DSC)
AF temperature measurement (DSC) capability for titanium components
Automatic spring coiling
Automatic spring coiling capability for titanium components
Assembly & riveting
Assembly & riveting capability for titanium components
Bead blasting of plasma-facing surfaces
Bead blasting of plasma-facing surfaces capability for titanium components
Bend forming of stiffener ribs and gussets
Bend forming of stiffener ribs and gussets capability for titanium components
CBN tool finishing
CBN tool finishing capability for titanium components
One Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.