BOZE CNC Ti | General Manufacturing

Beta-C wire cold coiling + shot peening + preset for shock springs

Beta-C wire cold coiling + shot peening + preset for shock springs capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
Varies by process Thickness Range
+0.01 mm (wire diameter) / +0.1 mm (free length) Cutting Tolerance
+0.01 mm (wire diameter) / +0.1 mm (free length) Tolerance
Ra 0.4 µm (no surface defects) Surface Finish
Titanium Coilover Spring Titanium Spring Lock Washer (DIN 127)

What is Beta-C wire cold coiling + shot peening + preset for shock springs?

Beta-C wire cold coiling + shot peening + preset for shock springs capability for titanium components

Integrated manufacturing capability for Beta-C wire cold coiling + shot peening + preset for shock springs, supported by in-house QC, material certification, and engineering review.

Engineering Parameters & Capabilities

Professional surface treatment process for for Oil & Gas titanium components. Beta-C wire cold coiling + shot peening + preset for shock springs is performed by certified technicians following approved procedures and specifications.

Parameter Specification
Process Type Beta-C wire cold coiling + shot peening + preset for shock springs

Engineering Capabilities & Limits

Integrated manufacturing capability for Beta-C wire cold coiling + shot peening + preset for shock springs, supported by in-house QC, material certification, and engineering review.

Hole Types Supported

Per engineering drawing

Heat Control Measures

Process parameters are monitored and controlled to ensure consistent quality. Environmental conditions are maintained within specified ranges.

Flatness & Stress Relief

Components are fixtured to maintain dimensional stability throughout the process. Post-process inspection verifies conformance.

Tolerance

+0.01 mm (wire diameter) / +0.1 mm (free length)

Typical Applications & Components

This process is used to manufacture the following titanium components.

Titanium Coilover Spring

Grade 5 Ti-6Al-4V Automotive & Motorsports

Titanium Spring Lock Washer (DIN 127)

Grade 5 Ti-6Al-4V General Industrial

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Quality Documentation

Full inspection report, material certs, and CoC included.

Shot Peening

Shot Peening for beta-c wire cold coiling + shot peening + preset for shock springs components.

Stress Relief

Stress Relief for beta-c wire cold coiling + shot peening + preset for shock springs components.

Fatigue Testing (S-N curve)

Fatigue Testing (S-N curve) for beta-c wire cold coiling + shot peening + preset for shock springs components.

Quality Assurance & Inspection

Inspection Items

  • Beta-C wire cold coiling + shot peening + preset for shock springs specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for Beta-C wire cold coiling + shot peening + preset for shock springs?
Beta-C wire cold coiling + shot peening + preset for shock springs can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with Beta-C wire cold coiling + shot peening + preset for shock springs?
Typical achievable tolerances for Beta-C wire cold coiling + shot peening + preset for shock springs are +0.01 mm (wire diameter) / +0.1 mm (free length). Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to Beta-C wire cold coiling + shot peening + preset for shock springs?
All Beta-C wire cold coiling + shot peening + preset for shock springs operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for Beta-C wire cold coiling + shot peening + preset for shock springs projects?
Lead times for Beta-C wire cold coiling + shot peening + preset for shock springs vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my Beta-C wire cold coiling + shot peening + preset for shock springs design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related General Manufacturing Capabilities

Other capabilities in the same category.

100% crack detection

100% crack detection capability for titanium components

3.1 MTC with VAR ingot traceability per ASME Section VIII

3.1 MTC with VAR ingot traceability per ASME Section VIII capability for titanium components

5-axis machining center

5-axis machining center capability for titanium components

7-stage UHP cleanroom wash for hydrogen fuel cell components

7-stage UHP cleanroom wash for hydrogen fuel cell components capability for titanium components

Adaptive machining

Adaptive machining capability for titanium components

Accelerated aging test (1000h)

Accelerated aging test (1000h) capability for titanium components

AF temperature measurement (DSC)

AF temperature measurement (DSC) capability for titanium components

Automatic spring coiling

Automatic spring coiling capability for titanium components

Assembly & riveting

Assembly & riveting capability for titanium components

Bead blasting of plasma-facing surfaces

Bead blasting of plasma-facing surfaces capability for titanium components

Bend forming of stiffener ribs and gussets

Bend forming of stiffener ribs and gussets capability for titanium components

CBN tool finishing

CBN tool finishing capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities