BOZE CNC Ti | General Manufacturing

5-axis machining center

5-axis machining center capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
Up to Ø800 mm × 500 mm (5-axis envelope) Thickness Range
±0.005 mm (positioning) / ±0.01 mm (contour) Cutting Tolerance
±0.005 mm (positioning) / ±0.01 mm (contour) Tolerance
Ra 0.4–0.8 µm (machined) / Ra 0.05 µm (polished) Surface Finish

What is 5-axis machining center?

5-axis machining center capability for titanium components

Precision machining capability for 5-axis machining center, utilizing multi-axis CNC centers with in-process inspection and SPC quality control.

Engineering Parameters & Capabilities

Simultaneous 5-axis CNC milling enables complex freeform geometries to be machined in a single setup, eliminating positional errors from multiple fixtures. The rotary A and C axes provide full access to undercut features and compound-angle surfaces while maintaining optimal tool engagement angles for titanium, specifically for titanium components. Precision titanium components present unique challenges: Balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM vs. laser) optimized for each feature.

Parameter Primary Method Alternative Method
Axes Simultaneous 5 axes (X/Y/Z + A/C rotary) 3+2 axes (positional)
Best For Blisk, impeller, turbine blade, complex bracket Prismatic mill-turn parts
Surface Finish (Ti) Ra 0.4 µm with small-step finishing Ra 1.6–3.2 µm
Cycle Time 30–70% faster than 3+2 for complex surfaces Faster for simple prismatic features

Engineering Capabilities & Limits

Precision machining capability for 5-axis machining center, utilizing multi-axis CNC centers with in-process inspection and SPC quality control.

Hole Types Supported

Freeform 3D contoured holes Compound-angle coolant passages Threaded holes in non-orthogonal faces

Heat Control Measures

Through-spindle coolant at 70 bar with cryogenic CO₂ assist. Tool engagement angles continuously optimized by CAM to avoid work-hardening of Ti-6Al-4V.

Flatness & Stress Relief

Roughing/finishing strategy with 10% radial engagement and adaptive trochoidal toolpaths. Post-process CMM verification ensures flatness within 0.005 mm over 200 mm.

Tolerance

±0.005 mm (positioning) / ±0.01 mm (contour)

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

CMM 5-Axis Inspection

Full 5-axis CMM inspection with scanning probes for profile tolerance verification per ASME Y14.5.

Surface Finishing

CNC polishing or micro-blasting to achieve specified Ra on aerodynamic surfaces.

Deburring

Deburring for 5-axis machining center components.

Dimensional Inspection

Dimensional Inspection for 5-axis machining center components.

Surface Treatment as Required

Surface Treatment as Required for 5-axis machining center components.

Quality Assurance & Inspection

Inspection Items

  • 5-axis machining center specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for 5-axis machining center?
5-axis machining center can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with 5-axis machining center?
Typical achievable tolerances for 5-axis machining center are ±0.005 mm (positioning) / ±0.01 mm (contour). Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to 5-axis machining center?
All 5-axis machining center operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for 5-axis machining center projects?
Lead times for 5-axis machining center vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my 5-axis machining center design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related General Manufacturing Capabilities

Other capabilities in the same category.

100% crack detection

100% crack detection capability for titanium components

3.1 MTC with VAR ingot traceability per ASME Section VIII

3.1 MTC with VAR ingot traceability per ASME Section VIII capability for titanium components

7-stage UHP cleanroom wash for hydrogen fuel cell components

7-stage UHP cleanroom wash for hydrogen fuel cell components capability for titanium components

Adaptive machining

Adaptive machining capability for titanium components

Accelerated aging test (1000h)

Accelerated aging test (1000h) capability for titanium components

AF temperature measurement (DSC)

AF temperature measurement (DSC) capability for titanium components

Automatic spring coiling

Automatic spring coiling capability for titanium components

Assembly & riveting

Assembly & riveting capability for titanium components

Bead blasting of plasma-facing surfaces

Bead blasting of plasma-facing surfaces capability for titanium components

Bend forming of stiffener ribs and gussets

Bend forming of stiffener ribs and gussets capability for titanium components

CBN tool finishing

CBN tool finishing capability for titanium components

Beta-C wire cold coiling + shot peening + preset for shock springs

Beta-C wire cold coiling + shot peening + preset for shock springs capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities