BOZE CNC Ti | General Manufacturing

Coordinate measurement of fiducial markers

Coordinate measurement of fiducial markers capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
All thicknesses — surface process only Thickness Range
Marking depth: 5–50 µm; line width 0.05–0.5 mm Cutting Tolerance
Marking depth: 5–50 µm; line width 0.05–0.5 mm Tolerance
Contrast: dark/white depending on laser parameters Surface Finish

What is Coordinate measurement of fiducial markers?

Coordinate measurement of fiducial markers capability for titanium components

Integrated manufacturing capability for Coordinate measurement of fiducial markers, supported by in-house QC, material certification, and engineering review.

Engineering Parameters & Capabilities

Fiber laser marking on titanium produces high-contrast, permanent identification marks by controlled surface oxidation or micro-engraving. UDI codes, serial numbers, 2D DataMatrix codes, and logos are marked without into the material, preserving structural integrity, specifically for titanium components. Precision titanium components present unique challenges: Balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM vs. laser) optimized for each feature.

Parameter Specification
Marking Method Surface oxidation / micro-engraving
Depth 5–50 µm (engraving mode)
Readability High contrast; permanent; readable after anodizing
Speed Up to 10,000 characters/min (galvo scanner)

Engineering Capabilities & Limits

Integrated manufacturing capability for Coordinate measurement of fiducial markers, supported by in-house QC, material certification, and engineering review.

Hole Types Supported

N/A

Heat Control Measures

Pulsed nanosecond fiber laser with galvo scanner. Marking depth controlled by pulse energy and repetition rate; no bulk heating of the component.

Flatness & Stress Relief

Non-contact process — no mechanical force applied. Focal distance maintained within ±0.5 mm across marking field via autofocus.

Tolerance

Marking depth: 5–50 µm; line width 0.05–0.5 mm

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Contrast Verification

Barcode/DataMatrix grade verification per ISO/IEC 15415.

Deburring

Deburring for coordinate measurement of fiducial markers components.

Dimensional Inspection

Dimensional Inspection for coordinate measurement of fiducial markers components.

Surface Treatment as Required

Surface Treatment as Required for coordinate measurement of fiducial markers components.

Quality Assurance & Inspection

Inspection Items

  • Coordinate measurement of fiducial markers specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for Coordinate measurement of fiducial markers?
Coordinate measurement of fiducial markers can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with Coordinate measurement of fiducial markers?
Typical achievable tolerances for Coordinate measurement of fiducial markers are Marking depth: 5–50 µm; line width 0.05–0.5 mm. Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to Coordinate measurement of fiducial markers?
All Coordinate measurement of fiducial markers operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for Coordinate measurement of fiducial markers projects?
Lead times for Coordinate measurement of fiducial markers vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my Coordinate measurement of fiducial markers design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related General Manufacturing Capabilities

Other capabilities in the same category.

100% crack detection

100% crack detection capability for titanium components

3.1 MTC with VAR ingot traceability per ASME Section VIII

3.1 MTC with VAR ingot traceability per ASME Section VIII capability for titanium components

5-axis machining center

5-axis machining center capability for titanium components

7-stage UHP cleanroom wash for hydrogen fuel cell components

7-stage UHP cleanroom wash for hydrogen fuel cell components capability for titanium components

Accelerated aging test (1000h)

Accelerated aging test (1000h) capability for titanium components

Adaptive machining

Adaptive machining capability for titanium components

AF temperature measurement (DSC)

AF temperature measurement (DSC) capability for titanium components

Assembly & riveting

Assembly & riveting capability for titanium components

Automatic spring coiling

Automatic spring coiling capability for titanium components

Bead blasting of plasma-facing surfaces

Bead blasting of plasma-facing surfaces capability for titanium components

Bend forming of stiffener ribs and gussets

Bend forming of stiffener ribs and gussets capability for titanium components

Beta-C wire cold coiling + shot peening + preset for shock springs

Beta-C wire cold coiling + shot peening + preset for shock springs capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities