BOZE CNC Ti | General Manufacturing

Ultra-sonic cleaning in Class 10

Ultra-sonic cleaning in Class 10 capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
Tank: Ø400 × 500 mm Thickness Range
No dimensional change Cutting Tolerance
No dimensional change Tolerance
Cleaned surface; no mechanical alteration Surface Finish

What is Ultra-sonic cleaning in Class 10?

Ultra-sonic cleaning in Class 10 capability for titanium components

Integrated manufacturing capability for Ultra-sonic cleaning in Class 10, supported by in-house QC, material certification, and engineering review.

Engineering Parameters & Capabilities

Ultrasonic cleaning uses high-frequency (25–130 kHz) sound waves to create cavitation bubbles in a cleaning solution. The implosion of these bubbles on the titanium surface dislodges contaminants (oil, chips, polishing compound) from blind holes, threads, and complex internal features, specifically for titanium components. Precision titanium components present unique challenges: balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM) is optimized for each feature.

Parameter Primary Method Alternative Method
Mechanism Cavitation implosion dislodges contaminants Pressure spray washing
Penetration Blind holes, threads, internal passages Line-of-sight only
Frequency 25 kHz (heavy) / 40 kHz (general) / 130 kHz (delicate) N/A

Engineering Capabilities & Limits

Integrated manufacturing capability for Ultra-sonic cleaning in Class 10, supported by in-house QC, material certification, and engineering review.

Hole Types Supported

N/A

Heat Control Measures

Solution at 50–70°C for optimal cavitation. Sequential wash-rinse-dry with DI water final rinse.

Flatness & Stress Relief

No mechanical force applied — dimensional stability maintained.

Tolerance

No dimensional change

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

HEPA Drying

HEPA-filtered hot air drying in a Class 100 environment.

Cleanroom Packaging

Double-bagged in Class 10/100 with VCI lining.

Deburring

Deburring for ultrasonic cleaning of Class 10 components.

Dimensional Inspection

Dimensional inspection for ultrasonic cleaning of Class 10 components.

Surface Treatment as Required

Surface treatment as required for ultrasonic cleaning of Class 10 components.

Quality Assurance & Inspection

Inspection Items

  • Ultra-sonic cleaning in Class 10 specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for Ultra-sonic cleaning in Class 10?
Ultra-sonic cleaning in Class 10 can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with Ultra-sonic cleaning in Class 10?
Typical achievable tolerances for Ultra-sonic cleaning in Class 10 are No dimensional change. Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to Ultra-sonic cleaning in Class 10?
All Ultra-sonic cleaning in Class 10 operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for Ultra-sonic cleaning in Class 10 projects?
Lead times for Ultra-sonic cleaning in Class 10 vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my Ultra-sonic cleaning in Class 10 design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related General Manufacturing Capabilities

Other capabilities in the same category.

100% crack detection

100% crack detection capability for titanium components

3.1 MTC with VAR ingot traceability per ASME Section VIII

3.1 MTC with VAR ingot traceability per ASME Section VIII capability for titanium components

5-axis machining center

5-axis machining center capability for titanium components

7-stage UHP cleanroom wash for hydrogen fuel cell components

7-stage UHP cleanroom wash for hydrogen fuel cell components capability for titanium components

Adaptive machining

Adaptive machining capability for titanium components

Accelerated aging test (1000h)

Accelerated aging test (1000h) capability for titanium components

AF temperature measurement (DSC)

AF temperature measurement (DSC) capability for titanium components

Automatic spring coiling

Automatic spring coiling capability for titanium components

Assembly & riveting

Assembly & riveting capability for titanium components

Bead blasting of plasma-facing surfaces

Bead blasting of plasma-facing surfaces capability for titanium components

Bend forming of stiffener ribs and gussets

Bend forming of stiffener ribs and gussets capability for titanium components

CBN tool finishing

CBN tool finishing capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities