Surface texturing (SLA/TPS coating)
Surface texturing (SLA/TPS coating) capability for titanium components
What is Surface texturing (SLA/TPS coating)?
Surface texturing (SLA/TPS coating) capability for titanium components
Surface engineering capability for Surface texturing (SLA/TPS coating), with process control, bath chemistry monitoring, and batch consistency validation.
Engineering Parameters & Capabilities
Titanium anodizing (AMS 2488) grows a controlled oxide layer through electrochemical conversion in an electrolyte bath. Type II produces interference colors (gold, blue, purple, green) for identification and cosmetics. Type III (hard anodizing) produces a thicker, abrasion-resistant oxide, specifically for rings. Precision rings for general and aerospace applications present unique challenges: roundness tolerance of ±0.01 mm on large diameter rings (> 300 mm) and heat treatment distortion management.
| Parameter | Specification |
|---|---|
| Coating | Electrochemical oxide conversion; not a deposit |
| Thickness | Type II: 0.5–5 µm / Type III: 5–25 µm |
| Colors | Gold (15V), blue (40V), green (70V), purple (90V) |
Engineering Capabilities & Limits
Surface engineering capability for Surface texturing (SLA/TPS coating), with process control, bath chemistry monitoring, and batch consistency validation.
Hole Types Supported
Heat Control Measures
Electrolyte bath at 20–24°C (Type II) or –5–0°C (Type III). Voltage ramp programmed to prevent localized overheating and burning.
Flatness & Stress Relief
No dimensional change—surface conversion only. Pre-treatment finish is preserved through the process.
Tolerance
Coating: 0.5–5 µm (Type II) / 5–25 µm (Type III); no dimensional change
Typical Applications & Components
This process is used to manufacture the following titanium components.
Secondary Operations & Downstream Processing
Enhance your component with our integrated downstream services:
Sealing
Hot water or nickel acetate sealing to close micro-porosity.
Laser Marking
Post-anodize laser marking for UDI or part ID on the oxide layer.
Heat Treatment
Heat treatment for surface texturing of SLA/TPS coating components.
OD/ID Grinding
OD/ID grinding for surface texturing of SLA/TPS coating components.
Dye Penetrant Inspection
Dye Penetrant Inspection for surface texturing (SLA/TPS coating) components.
Quality Assurance & Inspection
Inspection Items
- Surface texturing (SLA/TPS coating) specific dimensional verification (CMM / vision)
- Material grade verification (PMI / OES spectrometer)
- Fluorescent Penetrant Inspection (FPI) per ASTM E1417
Quality Standards & Certifications
- ISO 9001:2015 — Quality Management System
- AS9100D — Aerospace Quality Management
- ASTM B265 — Titanium Strip, Sheet, and Plate Standard
Frequently Asked Questions
What titanium grades are suitable for Surface texturing (SLA/TPS coating)?
What tolerances can be achieved with Surface texturing (SLA/TPS coating)?
What quality certifications apply to Surface texturing (SLA/TPS coating)?
What is the typical lead time for Surface texturing (SLA/TPS coating) projects?
Can you provide DFM feedback for my Surface texturing (SLA/TPS coating) design?
Related Surface Treatment Capabilities
Other capabilities in the same category.
Anodizing (AMS 2488)
Anodizing (AMS 2488) capability for titanium components
Anodizing (colors)
Anodizing (colors) capability for titanium components
Anodizing/DLC coating
Anodizing/DLC coating capability for titanium components
Anodizing
Anodizing capability for titanium components
Bead blasting / anodizing / PVD
Bead blasting / anodizing / PVD capability for titanium components
Cleaning & passivation
Cleaning & passivation capability for titanium components
Coating (if required)
Coating (if required) capability for titanium components
Cryogenic polishing for medical sonotrodes
Cryogenic polishing for medical sonotrodes capability for titanium components
DLC coating for wear resistance
DLC coating for wear resistance capability for titanium components
DLC coating (wear resistance)
DLC coating (wear resistance) capability for titanium components
Electrochemical polishing
Electrochemical polishing capability for titanium components
Electropolishing + Class 100 ultrasonic cleaning
Electropolishing + Class 100 ultrasonic cleaning capability for titanium components
One Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.