BOZE CNC Ti | Forging

Precision forging

Precision forging capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
Up to 500 kg ingot/billet; press capacity 3000 ton Thickness Range
+1.0 mm (as-forged) / +0.05 mm (post-CNC) Cutting Tolerance
+1.0 mm (as-forged) / +0.05 mm (post-CNC) Tolerance
As-forged scale; machined surfaces available Surface Finish

What is Precision forging?

Precision forging capability for titanium components

Hydraulic and mechanical press capability for Precision forging, with induction heating, die temperature control, and grain flow optimization.

Engineering Parameters & Capabilities

Closed-die forging of titanium uses shaped dies to compress heated billet into a net-shape or near-net-shape component. The process aligns grain flow with the component contour, producing superior mechanical properties compared to machined-from-bar stock, specifically for titanium components. Precision titanium components present unique challenges: Balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM vs. laser) optimized for each feature.

Parameter Specification
Method Closed-die / open-die / isothermal
Temperature 850–1050°C (below beta transus)
Grain Flow Aligned with component contour

Engineering Capabilities & Limits

Hydraulic and mechanical press capability for Precision forging, with induction heating, die temperature control, and grain flow optimization.

Hole Types Supported

N/A

Heat Control Measures

Induction heating with +10°C uniformity across the billet. Beta transus control (995°C for Ti-6Al-4V) to optimize alpha-beta microstructure.

Flatness & Stress Relief

Post-forge normalization at 700°C for CP grades. Straightening within 1 mm/m for long components.

Tolerance

+1.0 mm (as-forged) / +0.05 mm (post-CNC)

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Heat Treatment

Solution treatment and aging (STA) for alpha-beta alloys.

CNC Machining

Post-forge machining to final dimensions.

NDT Inspection

Ultrasonic inspection (UT) per AMS 2631.

Deburring

Deburring for precision forging components.

Dimensional Inspection

Dimensional Inspection for precision forging components.

Surface Treatment as Required

Surface Treatment as Required for precision forging components.

Quality Assurance & Inspection

Inspection Items

  • Precision forging specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for Precision forging?
Precision forging can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with Precision forging?
Typical achievable tolerances for Precision forging are +1.0 mm (as-forged) / +0.05 mm (post-CNC). Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to Precision forging?
All Precision forging operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for Precision forging projects?
Lead times for Precision forging vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my Precision forging design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related Forging Capabilities

Other capabilities in the same category.

Closed-die forging

Closed-die forging capability for titanium components

Hot forging + vacuum annealing of valve stems and bolts

Hot forging + vacuum annealing of valve stems and bolts capability for titanium components

Isothermal die forging

Isothermal die forging capability for titanium components

Ring rolling / forging

Ring rolling / forging capability for titanium components

Triaxial forging of billet for isotropic grain structure

Triaxial forging of billet for isotropic grain structure capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities