BOZE CNC Ti | General Manufacturing

Drilling of mounting holes

Drilling of mounting holes capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
0.1-8.0 mm Thickness Range
+0.02 mm (hole diameter) Cutting Tolerance
+0.02 mm (hole diameter) Tolerance
Spatter ring under 10 um Surface Finish

What is Drilling of mounting holes?

Drilling of mounting holes capability for titanium components

Integrated manufacturing capability for Drilling of mounting holes, supported by in-house QC, material certification, and engineering review.

Engineering Parameters & Capabilities

Laser drilling of titanium uses pulsed laser energy to create precise holes through percussion or trepanning methods. Hole diameters range from 0.05 mm to 3 mm with aspect ratios up to 20:1, specifically for titanium components. Precision titanium components present unique challenges: Balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM vs. laser) optimized for each feature.

Parameter Primary Method Alternative Method
Hole Diameter 0.05-3 mm 0.5 mm min (abrasive)
Aspect Ratio Up to 20:1 3:1
Speed 0.1-2 sec/hole (percussion) N/A

Engineering Capabilities & Limits

Integrated manufacturing capability for Drilling of mounting holes, supported by in-house QC, material certification, and engineering review.

Hole Types Supported

Micro-holes Cooling holes Filter perforations

Heat Control Measures

Pulsed fiber laser with nitrogen assist gas. Pulse energy and frequency controlled to minimize recast layer.

Flatness & Stress Relief

Non-contact process; no mechanical distortion. Vacuum fixturing for thin foil.

Tolerance

+0.02 mm (hole diameter)

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Recast Removal

Chemical etching to remove laser recast layer.

Deburring

Deburring for drilling of mounting holes components.

Dimensional Inspection

Dimensional Inspection for drilling of mounting holes components.

Surface Treatment as Required

Surface Treatment as Required for drilling of mounting holes components.

Quality Assurance & Inspection

Inspection Items

  • Drilling of mounting holes specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for Drilling of mounting holes?
Drilling of mounting holes can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with Drilling of mounting holes?
Typical achievable tolerances for Drilling of mounting holes are +0.02 mm (hole diameter). Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to Drilling of mounting holes?
All Drilling of mounting holes operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for Drilling of mounting holes projects?
Lead times for Drilling of mounting holes vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my Drilling of mounting holes design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related General Manufacturing Capabilities

Other capabilities in the same category.

100% crack detection

100% crack detection capability for titanium components

3.1 MTC with VAR ingot traceability per ASME Section VIII

3.1 MTC with VAR ingot traceability per ASME Section VIII capability for titanium components

5-axis machining center

5-axis machining center capability for titanium components

7-stage UHP cleanroom wash for hydrogen fuel cell components

7-stage UHP cleanroom wash for hydrogen fuel cell components capability for titanium components

Adaptive machining

Adaptive machining capability for titanium components

Accelerated aging test (1000h)

Accelerated aging test (1000h) capability for titanium components

AF temperature measurement (DSC)

AF temperature measurement (DSC) capability for titanium components

Automatic spring coiling

Automatic spring coiling capability for titanium components

Assembly & riveting

Assembly & riveting capability for titanium components

Bead blasting of plasma-facing surfaces

Bead blasting of plasma-facing surfaces capability for titanium components

Bend forming of stiffener ribs and gussets

Bend forming of stiffener ribs and gussets capability for titanium components

CBN tool finishing

CBN tool finishing capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities