BOZE CNC Ti | Machining

CNC milling / turning of susceptor and arms

CNC milling / turning of susceptor and arms capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
Up to 400 mm diameter x 1000 mm length Thickness Range
+0.01 mm (diameter) Cutting Tolerance
+0.01 mm (diameter) Tolerance
Ra 0.4-1.6 um Surface Finish
Titanium 3D-Printed Ergonomic Mouse Titanium Action Camera Lens Bezel Titanium Camera Hot Shoe Mount Titanium Camera Lens Filter Ring Titanium Dive Watch Case Titanium Dive Watch Crown

What is CNC milling / turning of susceptor and arms?

CNC milling / turning of susceptor and arms capability for titanium components

Precision machining capability for CNC milling / turning of susceptor and arms, utilizing multi-axis CNC centers with in-process inspection and SPC quality control.

Engineering Parameters & Capabilities

CNC turning of titanium on multi-axis lathes produces cylindrical components with precision diameters and surface finishes. Live tooling enables milling and drilling in the same setup, specifically for titanium components. Precision titanium components present unique challenges: Balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM vs. laser) optimized for each feature.

Parameter Primary Method Alternative Method
Setup Single setup with live tooling Multiple ops required

Engineering Capabilities & Limits

Precision machining capability for CNC milling / turning of susceptor and arms, utilizing multi-axis CNC centers with in-process inspection and SPC quality control.

Hole Types Supported

Bored holes Threaded IDs and ODs

Heat Control Measures

High-pressure coolant-through-tool for chip breaking and heat evacuation.

Flatness & Stress Relief

Steady rests for long slender parts. Stress-relieved stock recommended.

Tolerance

+0.01 mm (diameter)

Typical Applications & Components

This process is used to manufacture the following titanium components.

Titanium 3D-Printed Ergonomic Mouse

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Action Camera Lens Bezel

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Camera Hot Shoe Mount

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Camera Lens Filter Ring

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Dive Watch Case

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Dive Watch Crown

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium EDC Pen Body

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium EDC Utility Knife Handle

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Flashlight Body

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Foldable Phone Hinge

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Headphone Driver Enclosure

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Key Organizer Screw

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Laptop Hinge Shaft

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Laptop Hinge Bracket

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Mechanical Keyboard Keycap

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Pen Clip

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Pocket Comb

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium SIM Tray Eject Pin

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Smart Glasses Temple Arm

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Smartphone Mid-Frame

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Smartphone SIM Tray

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Smartwatch Bezel

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Smartphone Volume Button

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium SSD Armor Enclosure

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Stylus Pen Core Rod

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium TWS Earbud Grille

Grade 5 Ti-6Al-4V Consumer Electronics

Titanium Wallet Card Case

Grade 5 Ti-6Al-4V Consumer Electronics

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Deburring

Manual or robotic edge finishing.

Dimensional Inspection

Dimensional Inspection for cnc milling / turning of susceptor and arms components.

Surface Treatment as Required

Surface Treatment as Required for cnc milling / turning of susceptor and arms components.

Quality Assurance & Inspection

Inspection Items

  • CNC milling / turning of susceptor and arms specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for CNC milling / turning of susceptor and arms?
CNC milling / turning of susceptor and arms can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with CNC milling / turning of susceptor and arms?
Typical achievable tolerances for CNC milling / turning of susceptor and arms are +0.01 mm (diameter). Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to CNC milling / turning of susceptor and arms?
All CNC milling / turning of susceptor and arms operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for CNC milling / turning of susceptor and arms projects?
Lead times for CNC milling / turning of susceptor and arms vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my CNC milling / turning of susceptor and arms design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related Machining Capabilities

Other capabilities in the same category.

4/5-axis CNC milling

4/5-axis CNC milling capability for titanium components

5-axis CNC contour milling

5-axis CNC contour milling capability for titanium components

5-axis CNC machining of blades

5-axis CNC machining of blades capability for titanium components

5-axis CNC milling of aerofoils

5-axis CNC milling of aerofoils capability for titanium components

5-axis CNC milling of clevis brackets

5-axis CNC milling of clevis brackets capability for titanium components

5-axis CNC milling of manipulator knuckles and swivel joints

5-axis CNC milling of manipulator knuckles and swivel joints capability for titanium components

5-axis milling of faces

5-axis milling of faces capability for titanium components

5-axis simultaneous CNC milling

5-axis simultaneous CNC milling capability for titanium components

Automatic Swiss turning

Automatic Swiss turning capability for titanium components

Centerless grinding + DLC coating of actuator piston rods

Centerless grinding + DLC coating of actuator piston rods capability for titanium components

Centerless grinding of core taper

Centerless grinding of core taper capability for titanium components

CNC cutting / profile cutting

CNC cutting / profile cutting capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities