BOZE CNC Ti | Machining

Centerless grinding + DLC coating of actuator piston rods

Centerless grinding + DLC coating of actuator piston rods capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
Tank: 1200 × 800 × 600 mm; all part sizes Thickness Range
Coating: 0.5–5 µm (Type II) / 5–25 µm (Type III); no dimensional change Cutting Tolerance
Coating: 0.5–5 µm (Type II) / 5–25 µm (Type III); no dimensional change Tolerance
Retains substrate finish; matte to satin appearance Surface Finish

What is Centerless grinding + DLC coating of actuator piston rods?

Centerless grinding + DLC coating of actuator piston rods capability for titanium components

Precision machining capability for Centerless + DLC coating of actuator piston rods, utilizing multi-axis CNC centers with in-process inspection and SPC quality control.

Engineering Parameters & Capabilities

Titanium anodizing (AMS 2488) grows a controlled oxide layer through electrochemical conversion in an electrolyte bath. Type II produces interference colors (gold, blue, purple, green) for identification and cosmetics. Type III (hard anodizing) produces a thicker, abrasion-resistant oxide, specifically for titanium components. Precision titanium components present unique challenges: Balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM vs. laser) optimized for each feature.

Parameter Specification
Coating Electrochemical oxide conversion; not a deposit
Thickness Type II: 0.5–5 µm / Type III: 5–25 µm
Colors Gold (15V), blue (40V), green (70V), purple (90V)

Engineering Capabilities & Limits

Precision machining capability for Centerless + DLC coating of actuator piston rods, utilizing multi-axis CNC centers with in-process inspection and SPC quality control.

Hole Types Supported

N/A

Heat Control Measures

Electrolyte bath at 20–24°C (Type II) or –5–0°C (Type III). Voltage ramp programmed to prevent localized overheating and burning.

Flatness & Stress Relief

No dimensional change — surface conversion only. Pre-treatment finish is preserved through the process.

Tolerance

Coating: 0.5–5 µm (Type II) / 5–25 µm (Type III); no dimensional change

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Sealing

Hot water or nickel acetate sealing to close micro-porosity.

Laser Marking

Post-anodize laser marking for UDI or part ID on oxide layer.

Deburring

Deburring for centerless grinding + dlc coating of actuator piston rods components.

Dimensional Inspection

Dimensional Inspection for centerless grinding + dlc coating of actuator piston rods components.

Surface Treatment as Required

Surface Treatment as Required for centerless grinding + dlc coating of actuator piston rods components.

Quality Assurance & Inspection

Inspection Items

  • Centerless grinding + DLC coating of actuator piston rods specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for Centerless grinding + DLC coating of actuator piston rods?
Centerless grinding + DLC coating of actuator piston rods can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with Centerless grinding + DLC coating of actuator piston rods?
Typical achievable tolerances for Centerless grinding + DLC coating of actuator piston rods are Coating: 0.5–5 µm (Type II) / 5–25 µm (Type III); no dimensional change. Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to Centerless grinding + DLC coating of actuator piston rods?
All Centerless grinding + DLC coating of actuator piston rods operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for Centerless grinding + DLC coating of actuator piston rods projects?
Lead times for Centerless grinding + DLC coating of actuator piston rods vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my Centerless grinding + DLC coating of actuator piston rods design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related Machining Capabilities

Other capabilities in the same category.

4/5-axis CNC milling

4/5-axis CNC milling capability for titanium components

5-axis CNC contour milling

5-axis CNC contour milling capability for titanium components

5-axis CNC machining of blades

5-axis CNC machining of blades capability for titanium components

5-axis CNC milling of aerofoils

5-axis CNC milling of aerofoils capability for titanium components

5-axis CNC milling of clevis brackets

5-axis CNC milling of clevis brackets capability for titanium components

5-axis CNC milling of manipulator knuckles and swivel joints

5-axis CNC milling of manipulator knuckles and swivel joints capability for titanium components

5-axis milling of faces

5-axis milling of faces capability for titanium components

5-axis simultaneous CNC milling

5-axis simultaneous CNC milling capability for titanium components

Automatic Swiss turning

Automatic Swiss turning capability for titanium components

Centerless grinding of core taper

Centerless grinding of core taper capability for titanium components

CNC cutting / profile cutting

CNC cutting / profile cutting capability for titanium components

CNC gun drilling + centerless grinding of pivot axles

CNC gun drilling + centerless grinding of pivot axles capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities