Titanium SIM Tray Eject Pin is a precision-crafted microsimnvme tray ejector component designed for Micro-SIM/NVMe tray ejector pin M1.0. Machined from Grade 5 Ti-6Al-4V, it combines premium tactile aesthetics with structural rigidity in ultra-thin wall sections. Surface finish options include PVD coating, bead blasting, or mirror polish to match industrial design specifications.
Titanium SIM Tray Eject Pin
| Technical Parameter | Specification |
|---|---|
| Component SKU | TI-CE-PHO-TRAYEJ |
| Standards & Specifications | ASTM B348 |
| Surface Finish | Passivation ASTM F86 (20-30% HNO3, 30min @50C) |
Titanium SIM Tray Eject Pin
Micro-SIM/NVMe tray ejector pin M1.0
| Technical Parameter | Specification Value |
|---|---|
| International Compliance | ASTM B348 |
| Surface Finish & Max Temp | Passivation ASTM F86 (20-30% HNO3, 30min @50C) |
- • 100% Traceability: Mill Test Certificate (EN 10204 3.1) with heat analysis & mechanical testing.
- • Compliance: REACH, RoHS 3 certified. FAI AS9102 available.
- • Process: CNC precision machining, vacuum stress relief, thread rolling, surface passivation.
- • Thermal Stress Relief: Post-machining vacuum annealing (540-675°C under Argon) reduces distortion risk >70%.
- • Rolled Threads: Thread rolling (not cutting) increases fatigue limits by 30-50%.
Q: How does Titanium SIM Tray Eject Pin affect wireless signal transmission? ▼
Grade 5 Ti-6Al-4V has electrical conductivity of approximately 0.6 × 10⁶ S/m, significantly lower than aluminum (37 × 10⁶ S/m) or copper. For microsimnvme tray ejector, this means reduced eddy current losses in antenna near-field regions. However, antenna design must account for the conductive housing — typically with >2 mm clearance or FPC antenna placement on the outer surface.
Q: What is the typical lead time for Titanium SIM Tray Eject Pin orders? ▼
Standard lead time for Titanium SIM Tray Eject Pin is 15-25 business days depending on quantity and complexity. Rush orders (3-5 working days) are available for prototype evaluation. Sample evaluation (1-5 units) can be expedited to 5-7 business days. Volume pricing is available for production quantities above 100 units.
Q: What material certifications are provided with Titanium SIM Tray Eject Pin? ▼
Each Titanium SIM Tray Eject Pin shipment includes EN 10204 Type 3.1 mill test certificate with chemical analysis, mechanical properties, and heat identification. Dimensional inspection reports and Certificate of Conformance (CoC) are standard. First Article Inspection Reports (FAIR) per AS9102 are available on request for microsimnvme tray ejector.
§ Grade 5 Ti-6Al-4V Material Rationale for microsimnvme tray ejector
Function
A precision Phone Hardware component designed for . The selection of Grade 5 Ti-6Al-4V provides the optimal balance of strength-to-weight and environmental resistance required for this Consumer Electronics application.
Specifications
- SKU: TI-CE-PHO-TRAYEJ
- Category: Phone Hardware
- Industry: Consumer Electronics
- Material: Grade 5 Ti-6Al-4V
- Process: CNC precision machining, vacuum stress relief, thread rolling, surface passivation
- Weight: 35-45% lighter than steel equivalents at equivalent section modulus
§ Aesthetic & Functional Quality Verification
Quality Management
Quality system compliant with ISO 9001:2015. Each Titanium SIM Tray Eject Pin batch includes full material traceability, dimensional inspection results, and a Certificate of Conformity (CoC).
Inspection & NDT
Vision-based optical inspection for surface defects; helium leak testing for sealed interfaces; eddy current surface crack detection on high-stress areas
§ CNC & Finishing Process Flow
Titanium SIM Tray Eject Pin is manufactured using cnc precision machining, vacuum stress relief, thread rolling, surface passivation. Each operation is performed by certified machinists with real-time process monitoring and dimensional verification at critical stages. Heat code traceability is maintained throughout all production steps.
Commercial Logistics & Procurement Framework
Pricing and lead times for Titanium SIM Tray Eject Pin are batch-dependent. Contact our supply chain team for volume-based tiered pricing.
Regulatory & Quality Assurance Ledger
Verifiable certifications for Titanium SIM Tray Eject Pin
Material Test Certificate (MTC)
EN 10204 3.1
Environmental Compliance
REACH (EC No 1907/2006)
Restricted Substances
RoHS 3 Directive (2015/863/EU)
Quality Management System
ISO 9001:2015
Dimensional Tolerances
ISO 2768-m
Standard: ASTM B348
Systems Interconnectivity & Topology
Cross-functional integration matrix for Tier-1 supply chains and assembly orchestration.
- ▸ Primary Assembly Integration
- ▸ Subsystem Mounting Interface
Titanium SIM Tray Eject Pin
Material: Grade 5 Ti-6Al-4V
SKU: TI-CE-PHO-TRAYEJ
Industry: Consumer Electronics / System: Premium Consumer Electronics & Wearables
- ▸ Fastener Kit A
- ▸ Sealing Gasket
- ▸ Protective Cover
Request Enterprise Pricing
Fill out the form below and our team will respond within 24 hours with a tailored quotation for Titanium SIM Tray Eject Pin (SKU: TI-CE-PHO-TRAYEJ).
Ready to prototype titanium sim tray eject pin? Upload your CAD model — our engineering team provides DFM feedback within 24 hours.
Request DFM Analysis & Quote for Titanium SIM Tray Eject PinOne Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.