BOZE CNC Ti | Machining

CNC machining of tooth profiles

CNC machining of tooth profiles capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades

Up to Ø600 mm × 400 mm Thickness Range

±0.01 mm (positional) / ±0.02 mm (contour) Cutting Tolerance

±0.01 mm (positional) / ±0.02 mm (contour) Tolerance

Ra 0.8 µm (standard) / Ra 0.2 µm (precision) Surface Finish

Titanium Air Sparger Pipe Titanium Anti-Roll Bar Droplink Titanium AUV Propeller Shaft Titanium Ball Valve Stem Titanium Blind Flange (ASME B16.5) Titanium Bottom Bracket Spindle

What is CNC machining of tooth profiles?

CNC machining of tooth profiles capability for titanium components

Precision machining capability for CNC machining of tooth profiles, utilizing multi-axis CNC centers with in-process inspection and SPC quality control.

Engineering Parameters & Capabilities

5-axis CNC milling centers provide simultaneous multi-axis interpolation for complex titanium components. The ability to tilt the tool relative to the workpiece surface maintains optimal chip load and extends tool life, critical for difficult-to-machine titanium alloys.

Parameter	Primary Method	Alternative Method
Kinematics	Full 5-axis simultaneous interpolation	3+2 positional indexing
Surface Finish	Ra 0.8 µm standard; Ra 0.2 µm with finishing pass	Ra 1.6–6.3 µm
Tool Access	Unrestricted — tool can approach from any angle	Limited — each setup indexes the part

Engineering Capabilities & Limits

Precision machining capability for CNC machining of tooth profiles, utilizing multi-axis CNC centers with in-process inspection and SPC quality control.

Hole Types Supported

Coolant passages Threaded holes at compound angles Counterbored fastener holes

Heat Control Measures

High-pressure coolant-through-spindle (50–70 bar) with coated carbide tooling. Adaptive trochoidal milling paths reduce radial engagement to control heat generation.

Flatness & Stress Relief

Stress-relieved raw material and sequenced roughing/finishing passes. Heat-sink fixturing for thin-wall sections minimizes thermal distortion.

Tolerance

±0.01 mm (positional) / ±0.02 mm (contour)

Typical Applications & Components

This process is used to manufacture the following titanium components.

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Deburring

Manual or robotic deburring of sharp edges and thread protection.

Dimensional Inspection

Dimensional Inspection for cnc machining of tooth profiles components.

Surface Treatment as Required

Surface Treatment as Required for cnc machining of tooth profiles components.

Quality Assurance & Inspection

Inspection Items

CNC machining of tooth profiles specific dimensional verification (CMM / vision)
Material grade verification (PMI / OES spectrometer)

Quality Standards & Certifications

ISO 9001:2015 — Quality Management System
AS9100D — Aerospace Quality Management
ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for CNC machining of tooth profiles?

CNC machining of tooth profiles can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.

What tolerances can be achieved with CNC machining of tooth profiles?

Typical achievable tolerances for CNC machining of tooth profiles are ±0.01 mm (positional) / ±0.02 mm (contour). Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.

What quality certifications apply to CNC machining of tooth profiles?

All CNC machining of tooth profiles operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.

What is the typical lead time for CNC machining of tooth profiles projects?

Lead times for CNC machining of tooth profiles vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.

Can you provide DFM feedback for my CNC machining of tooth profiles design?

Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related Machining Capabilities

Other capabilities in the same category.

4/5-axis CNC milling

4/5-axis CNC milling capability for titanium components

5-axis CNC contour milling

5-axis CNC contour milling capability for titanium components

5-axis CNC machining of blades

5-axis CNC machining of blades capability for titanium components

5-axis CNC milling of aerofoils

5-axis CNC milling of aerofoils capability for titanium components

5-axis CNC milling of clevis brackets

5-axis CNC milling of clevis brackets capability for titanium components

5-axis CNC milling of manipulator knuckles and swivel joints

5-axis CNC milling of manipulator knuckles and swivel joints capability for titanium components

5-axis milling of faces

5-axis milling of faces capability for titanium components

5-axis simultaneous CNC milling

5-axis simultaneous CNC milling capability for titanium components

Automatic Swiss turning

Automatic Swiss turning capability for titanium components

Centerless grinding + DLC coating of actuator piston rods

Centerless grinding + DLC coating of actuator piston rods capability for titanium components

Centerless grinding of core taper

Centerless grinding of core taper capability for titanium components

CNC cutting / profile cutting

CNC cutting / profile cutting capability for titanium components

About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM

Learn About Us Request a Quote

Explore More: Material Specifications Industry Applications All Services Capabilities

CNC machining of tooth profiles

What is CNC machining of tooth profiles?

Engineering Parameters & Capabilities

Engineering Capabilities & Limits

Hole Types Supported

Heat Control Measures

Flatness & Stress Relief

Tolerance

Typical Applications & Components

Titanium Air Sparger Pipe

Titanium Anti-Roll Bar Droplink

Titanium AUV Propeller Shaft

Titanium Ball Valve Stem

Titanium Blind Flange (ASME B16.5)

Titanium Bottom Bracket Spindle

Titanium Camber Adjustment Shim

Titanium Cassette Cog

Titanium Catalyst Basket Mesh Liner

Titanium Chainring Bolt

Titanium Chainring

Titanium Chlorine Compressor Impeller

Titanium Coilover Spring

Titanium Concentric Reducer

Titanium Connecting Rod

Titanium Control Rod Seal Housing

Titanium Cryogenic H2 Flange Bolt

Titanium Deep-Sea Release Hook Pin

Titanium Derailleur Limit Screw

Titanium Derailleur Pulley

Titanium Dosing Pump Impeller

Titanium Downhole Production Tubing

Titanium Downhole Wireline Barrel

Titanium ECCS Valve Stem

Titanium Eductor Nozzle

Titanium Equal Tee (ASME B16.9)

Titanium Filter Press Tie Rod

Titanium Fuel Cell End Plate

Titanium Fuel Pool Rack Spacer

Titanium Heat Exchanger Tube Bundle