Certified Quality Assurance & Titanium Traceability Infrastructure
Operating under a zero-defect quality philosophy. From raw titanium sponge verification via EN 10204 3.1 MTRs to multi-axis CMM dimensional validation, our precision infrastructure is strictly aligned with AS9100D and ISO 13485 standards to guarantee mission-critical compliance.
Read more Show less
Industry Certifications & Quality Standards
Every titanium component is manufactured under a multi-standard quality management framework audited by international registrars.
9100
AS9100 Rev D
Система менеджмента качества в аэрокосмической отрасли
Full-scope aerospace quality management system covering design, development, production, and distribution of titanium aerospace components. Regular surveillance audits ensure continuous compliance with AS9100D risk management, counterfeit part prevention (AS6174/AS5553), and first-article inspection (AS9102) protocols.
13485
ISO 13485:2016
Medical Device QMS
Process controls aligned with ISO 13485 for the manufacture of medical-grade titanium components — including surgical implants, orthopedic instruments, and dental prosthetics. Risk management per ISO 14971, cleanroom-compatible production workflows, and full batch traceability for implantable devices.
9001
ISO 9001:2015
Общее управление качеством
Foundational quality management framework with documented processes for continuous improvement, corrective/preventive action, customer-focused output, and supplier quality management across all departments.
Precision Measurement Capabilities
All inspection equipment calibrated per ISO 17025 and AS9100D requirements — with full traceability to national standards.
Координатно-измерительная машина с ЧПУ (КИМ)
Automated 3D dimensional analysis capturing tolerances down to ±0.0015 mm. Multi-axis scanning with active vibration dampening for micron-level accuracy on complex titanium geometries.
Верификация материала рентгенофлуоресцентным спектрометром (XRF)
Instant, non-destructive chemical composition analysis of incoming titanium lots. Confirms elemental makeup within 30 seconds, ensuring every batch matches the specified grade chemistry per ASTM E415.
Визуальный контроль и профилометры поверхности
Non-contact high-resolution optical inspection for fragile micro-features and precise micro-inch surface roughness (Ra) certification. Optical comparators for 2D profile verification of complex titanium geometries.
Quality & Compliance Infrastructure
Rigorous inbound inspection (IQC), in-process quality control (IPQC), and final outbound quality control (OQC) — every stage gated and documented.
- 1
Входной контроль — Приемка сырья и верификация PMI
Этап 1: Входной контрольIncoming raw material verification against purchase order specifications including material grade confirmation via PMI (Positive Material Identification) using Optical Emission Spectrometry (OES). Dimensional verification of bar/plate/billet dimensions and surface condition assessment. Material Test Reports cross-referenced against the heat number and stored in our ERP system for full lot traceability.
- 2
Контроль первой детали (FAI) и утверждение
Этап 2: Подготовка производстваReal-time dimensional and surface quality monitoring during machining operations. Operators perform first-article inspection per AS9102 upon machine setup, followed by statistical process control checks at defined intervals. CMM in-process sampling verifies critical features before secondary operations proceed.
- 3
Межоперационный контроль — Статистическое управление процессами
Этап 3: Мониторинг в реальном времениFinal comprehensive inspection before shipment including 100% CMM dimensional inspection (where specified), surface roughness verification, thread gauge testing, and visual inspection under controlled lighting. All results recorded in Certificate of Conformance and inspection reports shipped with each order.
- 4
Выходной контроль — Приемочная метрология и аудит КИМ
Этап 4: Предотгрузочный аудитpage_quality.workflow.step4_desc
Documentation & Traceability Records
Every shipment includes comprehensive quality documentation with full material traceability from mill to finished part.
| Document Type | Description & Purpose | Applicable Standard / Regulation |
|---|---|---|
| Mill Test Report (MTR) | Химический состав и физические механические свойства партии титана, включая предел текучести, предел прочности и относительное удлинение. | EN 10204 3.1 / Спецификации ASTM |
| Сертификат соответствия (CoC) | Официальный юридически обязывающий документ, подтверждающий, что все производственные процессы, результаты контроля и свойства материала соответствуют допускам чертежа и спецификациям заказчика. | ISO 9001 / Чертежи заказчика |
| Размерный отчет КИМ | Полный 3D геометрический и размерный аудит с отображением фактических и номинальных значений для каждой критической характеристики, включая проверку допусков GD&T. | Соответствие GD&T ASME Y14.5 |
| AS9102 FAIR (опционально) | Строгий отчет о верификации первой детали для аэрокосмической отрасли, регистрирующий все пронумерованные размеры с фактическими измерениями, сертификатами материалов и спецификациями процессов. | Протоколы аэрокосмического стандарта AS9100D |
Compliance & Inspection Q&A
Answers to the most frequent quality assurance questions from aerospace and medical procurement engineers.
Which quality certifications does BOZE CNC hold for titanium manufacturing?
BOZE CNC Metal’s quality management system is certified to AS9100D (Aerospace), ISO 13485:2016 (Medical Devices), and ISO 9001:2015 (General Quality). Our Nadcap accreditation covers NDT processes (fluorescent dye penetrant inspection and ultrasonic testing). All certifications are issued by accredited international registrars with current scope available for customer review upon request.
How do you ensure material traceability from mill to finished part?
Every incoming raw material batch is logged with a unique lot number in our ERP system that links to the original heat number, MTR, CMM inspection results, and production traveler. This provides complete forward and backward traceability — from finished part back to the original mill batch.
What inspection equipment is used for dimensional validation of titanium parts?
Our in-house metrology lab is equipped with a ZEISS CMM (bridge-type, 1.9 μm volumetric accuracy), OGP SmartScope optical comparators, and Mitutoyo SJ-410 surface roughness testers. For material verification, we use a SPECTROMAXx Optical Emission Spectrometer for rapid PMI analysis. NDT capabilities include fluorescent dye penetrant (FPI) and ultrasonic (UT) testing. All inspection equipment is calibrated per ISO 17025 traceable standards with calibration certificates available on request.
What quality documentation is included with each shipment?
Each shipment includes a comprehensive quality dossier containing: Certified Mill Test Reports (MTRs) per EN 10204 Type 3.1 documenting raw material composition and mechanical properties; Certificate of Conformance (CoC) confirming all manufacturing and inspection processes meet customer specifications; CMM dimensional inspection reports with actual vs. nominal measurements per ASME Y14.5 GD&T; and Surface roughness certification where required. AS9102-compliant First Article Inspection Reports (FAIR) are provided for aerospace programs upon request.
Request our quality management brochure or schedule a facility audit.
Request Quality DocumentationOne Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.