Titanium LPT Blade (Gamma-TiAl) is an AS9100D-certified lowpressure turbine blade component designed for Low-pressure turbine blade, gamma-TiAl intermetallic. Machined from Grade 5 Ti-6Al-4V per AMS specifications, it delivers the damage tolerance, fatigue life, and material traceability required for flight-critical aerospace assemblies.
Titanium LPT Blade (Gamma-TiAl)
Titanium LPT Blade (Gamma-TiAl)
Low-pressure turbine blade, gamma-TiAl intermetallic
| Technical Parameter | Specification Value |
|---|---|
| International Compliance | ASTM B348, ISO 9001 |
| Surface Finish & Max Temp | Bead blasted matte Ra 1.6-3.2um + passivation |
- • 100% Traceability: Mill Test Certificate (EN 10204 3.1) with heat analysis & mechanical testing.
- • Compliance: REACH, RoHS 3 certified. FAI AS9102 available.
- • Process: CNC turning, heat treatment, surface grinding, passivation, dimensional check.
- • Thermal Stress Relief: Post-machining vacuum annealing (540-675°C under Argon) reduces distortion risk >70%.
- • Rolled Threads: Thread rolling (not cutting) increases fatigue limits by 30-50%.
Q: What fatigue life can Titanium LPT Blade (Gamma-TiAl) achieve under flight load spectra? ▼
Titanium LPT Blade (Gamma-TiAl) designed to safe-life criteria per MIL-STD-1530 demonstrates minimum 10⁵ flight cycles for lowpressure turbine blade at 75% of yield strength. The fatigue crack growth rate in Grade 5 Ti-6Al-4V follows da/dN = 2.2×10⁻⁸ (ΔK)³·² m/cycle in air, with a threshold ΔKth of approximately 5.5 MPa√m. Crack growth predictions use AFGROW or NASGRO with validated material data.
Q: What is the typical lead time for Titanium LPT Blade (Gamma-TiAl) orders? ▼
Standard lead time for Titanium LPT Blade (Gamma-TiAl) is 15-25 business days depending on quantity and complexity. Rush orders (3-5 working days) are available for prototype evaluation. Sample evaluation (1-5 units) can be expedited to 5-7 business days. Volume pricing is available for production quantities above 100 units.
Q: What material certifications are provided with Titanium LPT Blade (Gamma-TiAl)? ▼
Each Titanium LPT Blade (Gamma-TiAl) shipment includes EN 10204 Type 3.1 mill test certificate with chemical analysis, mechanical properties, and heat identification. Dimensional inspection reports and Certificate of Conformance (CoC) are standard. First Article Inspection Reports (FAIR) per AS9102 are available on request for lowpressure turbine blade.
§ Why Grade 5 Ti-6Al-4V for lowpressure turbine blade
Function
A precision Engine Component component designed for . The selection of Grade 5 Ti-6Al-4V provides the optimal balance of strength-to-weight and environmental resistance required for this Aerospace & Defense application.
Specifications
- SKU: TI-AERO-ENG-BLADEG
- Category: Engine Component
- Industry: Aerospace & Defense
- Material: Grade 5 Ti-6Al-4V
- Process: CNC turning, heat treatment, surface grinding, passivation, dimensional check
- Weight: 40% mass reduction vs standard steel components with same load rating
§ NDT & Material Verification per AS9102
Quality Management
Manufactured to aerospace-grade quality standards with 100% material traceability. FAIR documentation available per AS9102 for Titanium LPT Blade (Gamma-TiAl) production lots.
Inspection & NDT
Coordinate measuring machine (CMM) full geometry verification; dye penetrant inspection (DPI) per ASTM E1417; spectroscopic alloy verification per ASTM E1476
§ AS9100D-Certified Manufacturing Process
Titanium LPT Blade (Gamma-TiAl) is manufactured using cnc turning, heat treatment, surface grinding, passivation, dimensional check. Each operation is performed by certified machinists with real-time process monitoring and dimensional verification at critical stages. Heat code traceability is maintained throughout all production steps.
Commercial Logistics & Procurement Framework
Pricing and lead times for Titanium LPT Blade (Gamma-TiAl) are batch-dependent. Contact our supply chain team for volume-based tiered pricing.
Regulatory & Quality Assurance Ledger
Verifiable certifications for Titanium LPT Blade (Gamma-TiAl)
Material Test Certificate (MTC)
EN 10204 3.1
Environmental Compliance
REACH (EC No 1907/2006)
Restricted Substances
RoHS 3 Directive (2015/863/EU)
Quality Management System
AS9100D
Standard: ASTM B348
Standard: ISO 9001
ISO 9001
Systems Interconnectivity & Topology
Cross-functional integration matrix for Tier-1 supply chains and assembly orchestration.
- ▸ Mechanical Subsystem A
- ▸ Structural Carrier Assembly
Titanium LPT Blade (Gamma-TiAl)
Material: Grade 5 Ti-6Al-4V
SKU: TI-AERO-ENG-BLADEG
Industry: Aerospace & Defense / System: Aero Engine Compressor Blisks & Blades
- ▸ Mounting Bracket Kit
- ▸ Threaded Insert Set
- ▸ Torque Specification Tag
Request Enterprise Pricing
Fill out the form below and our team will respond within 24 hours with a tailored quotation for Titanium LPT Blade (Gamma-TiAl) (SKU: TI-AERO-ENG-BLADEG).
Need an AS9100D-certified titanium lpt blade (gamma-tial)? Send your print or model — our aerospace engineering team responds within 24 hours.
Request Aerospace Manufacturing Quote for Titanium LPT Blade (Gamma-TiAl)One Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.