Titanium Hypersonic Control Surface is an AS9100D-certified hypersonic missile allmoving component designed for Hypersonic missile all-moving fin (Ti-65). Machined from Ti-65 per AMS specifications, it delivers the damage tolerance, fatigue life, and material traceability required for flight-critical aerospace assemblies.
Titanium Hypersonic Control Surface
Titanium Hypersonic Control Surface
Hypersonic missile all-moving fin (Ti-65)
| Technical Parameter | Specification Value |
|---|---|
| International Compliance | ASTM B348, ISO 9001 |
| Surface Finish & Max Temp | Bead blasted matte Ra 1.6-3.2um + passivation |
- • 100% Traceability: Mill Test Certificate (EN 10204 3.1) with heat analysis & mechanical testing.
- • Compliance: REACH, RoHS 3 certified. FAI AS9102 available.
- • Process: CNC turning, heat treatment, surface grinding, passivation, dimensional check.
- • Thermal Stress Relief: Post-machining vacuum annealing (540-675°C under Argon) reduces distortion risk >70%.
- • Rolled Threads: Thread rolling (not cutting) increases fatigue limits by 30-50%.
Q: What fatigue life can Titanium Hypersonic Control Surface achieve under flight load spectra? ▼
Titanium Hypersonic Control Surface designed to safe-life criteria per MIL-STD-1530 demonstrates minimum 10⁵ flight cycles for hypersonic missile allmoving at 75% of yield strength. The fatigue crack growth rate in Ti-65 follows da/dN = 2.2×10⁻⁸ (ΔK)³·² m/cycle in air, with a threshold ΔKth of approximately 5.5 MPa√m. Crack growth predictions use AFGROW or NASGRO with validated material data.
Q: What is the typical lead time for Titanium Hypersonic Control Surface orders? ▼
Standard lead time for Titanium Hypersonic Control Surface is 15-25 business days depending on quantity and complexity. Rush orders (3-5 working days) are available for prototype evaluation. Sample evaluation (1-5 units) can be expedited to 5-7 business days. Volume pricing is available for production quantities above 100 units.
Q: What material certifications are provided with Titanium Hypersonic Control Surface? ▼
Each Titanium Hypersonic Control Surface shipment includes EN 10204 Type 3.1 mill test certificate with chemical analysis, mechanical properties, and heat identification. Dimensional inspection reports and Certificate of Conformance (CoC) are standard. First Article Inspection Reports (FAIR) per AS9102 are available on request for hypersonic missile allmoving.
§ Why Ti-65 for hypersonic missile allmoving
Function
A precision Missile Hardware component designed for . The selection of Ti-65 provides the optimal balance of strength-to-weight and environmental resistance required for this Aerospace & Defense application.
Specifications
- SKU: TI-AERO-MIS-HYPERS
- Category: Missile Hardware
- Industry: Aerospace & Defense
- Material: Ti-65
- Process: CNC turning, heat treatment, surface grinding, passivation, dimensional check
- Weight: 40% mass reduction vs standard steel components with same load rating
§ NDT & Material Verification per AS9102
Quality Management
Quality system compliant with ISO 9001:2015. Each Titanium Hypersonic Control Surface batch includes full material traceability, dimensional inspection results, and a Certificate of Conformity (CoC).
Inspection & NDT
Vision-based optical inspection for surface defects; helium leak testing for sealed interfaces; eddy current surface crack detection on high-stress areas
§ AS9100D-Certified Manufacturing Process
Titanium Hypersonic Control Surface is manufactured using cnc turning, heat treatment, surface grinding, passivation, dimensional check. Each operation is performed by certified machinists with real-time process monitoring and dimensional verification at critical stages. Heat code traceability is maintained throughout all production steps.
Commercial Logistics & Procurement Framework
Pricing and lead times for Titanium Hypersonic Control Surface are batch-dependent. Contact our supply chain team for volume-based tiered pricing.
Regulatory & Quality Assurance Ledger
Verifiable certifications for Titanium Hypersonic Control Surface
Material Test Certificate (MTC)
EN 10204 3.1
Environmental Compliance
REACH (EC No 1907/2006)
Restricted Substances
RoHS 3 Directive (2015/863/EU)
Quality Management System
AS9100D
Standard: ASTM B348
Standard: ISO 9001
ISO 9001
Systems Interconnectivity & Topology
Cross-functional integration matrix for Tier-1 supply chains and assembly orchestration.
- ▸ Mechanical Subsystem A
- ▸ Structural Carrier Assembly
Titanium Hypersonic Control Surface
Material: Ti-65
SKU: TI-AERO-MIS-HYPERS
Industry: Aerospace & Defense / System: Hypersonic Vehicle Control Surfaces
- ▸ Mounting Bracket Kit
- ▸ Threaded Insert Set
- ▸ Torque Specification Tag
Request Enterprise Pricing
Fill out the form below and our team will respond within 24 hours with a tailored quotation for Titanium Hypersonic Control Surface (SKU: TI-AERO-MIS-HYPERS).
Need an AS9100D-certified titanium hypersonic control surface? Send your print or model — our aerospace engineering team responds within 24 hours.
Request Aerospace Manufacturing Quote for Titanium Hypersonic Control SurfaceOne Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.