Water pressure testing (to rated depth x 1.25 safety factor)
Water pressure testing (to rated depth x 1.25 safety factor) capability for titanium components
What is Water pressure testing (to rated depth x 1.25 safety factor)?
Water pressure testing (to rated depth x 1.25 safety factor) capability for titanium components
NDT and dimensional inspection service for Water pressure testing (to rated depth x 1.25 safety factor), performed by certified technicians per applicable standards.
Engineering Parameters & Capabilities
Abrasive waterjet cutting of titanium uses a high-pressure stream of water mixed with garnet abrasive to erode material. The cold-cutting process produces zero heat-affected zone, making it ideal for titanium grades sensitive to thermal cracking, particularly for titanium components. Precision titanium components present unique challenges: balancing dimensional accuracy with cost per part. Process selection (mill vs. turn vs. EDM vs. laser) is optimized for each feature.
| Parameter | Primary Method | Alternative Method |
|---|---|---|
| Cutting Mechanism | High-pressure water + garnet abrasive | Focused laser beam melts/vaporizes |
| HAZ | Zero - cold cutting | 0.05-0.15 mm with N2 assist |
| Max Thickness | 100 mm+ (abrasive waterjet) | 15 mm (fiber laser) |
| Kerf Width | 0.7-1.2 mm | 0.1-0.3 mm |
Engineering Capabilities & Limits
NDT and dimensional inspection service for Water pressure testing (to rated depth x 1.25 safety factor), performed by certified technicians per applicable standards.
Hole Types Supported
Heat Control Measures
No heat generated - room temperature waterjet stream. HAZ-free process preserves titanium microstructure.
Flatness & Stress Relief
No thermal distortion. Flatness depends on incoming stock condition.
Tolerance
+0.1 mm
Secondary Operations & Downstream Processing
Enhance your component with our integrated downstream services:
Drying
Hot air drying to remove residual moisture from cut surfaces.
Deburring
Deburring components for water pressure testing (to rated depth x 1.25 safety factor).
Dimensional Inspection
Dimensional inspection for water pressure testing (to rated depth × 1.25 safety factor) components.
Surface Treatment as Required
Surface treatment as required for water pressure testing of components (to rated depth × 1.25 safety factor).
Quality Assurance & Inspection
Inspection Items
- Water pressure testing (to rated depth x 1.25 safety factor) specific dimensional verification (CMM / vision)
- Material grade verification (PMI / OES spectrometer)
Quality Standards & Certifications
- ISO 9001:2015 — Quality Management System
- AS9100D — Aerospace Quality Management
- ASTM B265 — Titanium Strip, Sheet, and Plate Standard
Frequently Asked Questions
What titanium grades are suitable for Water pressure testing (to rated depth x 1.25 safety factor)?
What tolerances can be achieved with Water pressure testing (to rated depth x 1.25 safety factor)?
What quality certifications apply to Water pressure testing (to rated depth x 1.25 safety factor)?
What is the typical lead time for Water pressure testing (to rated depth x 1.25 safety factor) projects?
Can you provide DFM feedback for my Water pressure testing (to rated depth x 1.25 safety factor) design?
Related Inspection Capabilities
Other capabilities in the same category.
100% dimensional inspection (CMM)
100% dimensional inspection (CMM) capability for titanium components
100% eddy current testing (ECT) of condenser tubes
100% eddy current testing (ECT) of condenser tubes capability for titanium components
3D CMM inspection of spherical bearing housing bores
3D CMM inspection of spherical bearing housing bores capability for titanium components
3D CMM inspection
3D CMM inspection capability for titanium components
Ballistic testing (per NIJ/MIL-STD)
Ballistic testing (per NIJ/MIL-STD) capability for titanium components
Batch testing (mechanical + metallographic)
Batch testing (mechanical + metallographic) capability for titanium components
Charpy impact testing at -253C for LH2 cryogenic hardware
Charpy impact testing at -253C for LH2 cryogenic hardware capability for titanium components
Charpy impact testing at -253C
Charpy impact testing at -253C capability for titanium components
CMM alignment of hanger interface
CMM alignment of hanger interface capability for titanium components
CMM blade profiling
CMM blade profiling capability for titanium components
CMM contour inspection (+-0.2mm)
CMM contour inspection (+-0.2mm) capability for titanium components
CMM dimensional inspection of contact spacing
CMM dimensional inspection of contact spacing capability for titanium components
One Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.