100% eddy current testing (ECT) of condenser tubes
100% eddy current testing (ECT) of condenser tubes capability for titanium components
What is 100% eddy current testing (ECT) of condenser tubes?
100% eddy current testing (ECT) of condenser tubes capability for titanium components
NDT and dimensional inspection service for 100% eddy current testing (ECT) of condenser tubes, performed by certified technicians per applicable standards.
Engineering Parameters & Capabilities
Coordinate Measuring Machine (CMM) inspection provides quantitative dimensional verification of titanium components against GD&T specifications per ASME Y14.5. Touch-trigger probes, scanning heads, and non-contact laser sensors accommodate geometries from simple prismatic to complex freeform surfaces, specifically for tube. Precision tube for Chemical, Aerospace, Medical present unique challenges: Wall thickness uniformity (±0.05 mm) over long lengths. Internal surface finish Ra < 0.8 µm for fluid flow. Bent tube ovality control.
| Parameter | Specification |
|---|---|
| Probe Type | Touch-trigger / scanning / non-contact laser |
| Uncertainty | +(1.0 + L/300) µm per ISO 10360 |
| GD&T | Full: form, orientation, location, runout |
Engineering Capabilities & Limits
NDT and dimensional inspection service for 100% eddy current testing (ECT) of condenser tubes, performed by certified technicians per applicable standards.
Hole Types Supported
Heat Control Measures
Temperature-controlled metrology lab at 20+1°C. Components stabilized on granite surface plate for minimum 4 hours before measurement.
Flatness & Stress Relief
Granite surface plate Grade 00 (flatness < 1 µm/m) as reference datum.
Tolerance
Measurement uncertainty: +(1.0 + L/300) µm per ISO 10360
Typical Applications & Components
This process is used to manufacture the following titanium components.
Secondary Operations & Downstream Processing
Enhance your component with our integrated downstream services:
Inspection Report
Full FAIR (AS9102) with graphical pass/fail color map.
CoC
Certificate of Conformance with material certification traceability.
Tube Bending
Tube Bending for 100% eddy current testing (ect) of condenser tubes components.
Weld Preparation (End Bevelling)
Weld Preparation (End Bevelling) for 100% eddy current testing (ect) of condenser tubes components.
Hydrostatic Pressure Test
Hydrostatic Pressure Test for 100% eddy current testing (ect) of condenser tubes components.
Quality Assurance & Inspection
Inspection Items
- 100% eddy current testing (ECT) of condenser tubes specific dimensional verification (CMM / vision)
- Material grade verification (PMI / OES spectrometer)
- Fluorescent Penetrant Inspection (FPI) per ASTM E1417
- Biocompatibility validation per ISO 10993
Quality Standards & Certifications
- ISO 9001:2015 — Quality Management System
- AS9100D — Aerospace Quality Management
- ASTM B265 — Titanium Strip, Sheet, and Plate Standard
- ISO 13485 — Medical Device Quality Management
Frequently Asked Questions
What titanium grades are suitable for 100% eddy current testing (ECT) of condenser tubes?
What tolerances can be achieved with 100% eddy current testing (ECT) of condenser tubes?
What quality certifications apply to 100% eddy current testing (ECT) of condenser tubes?
What is the typical lead time for 100% eddy current testing (ECT) of condenser tubes projects?
Can you provide DFM feedback for my 100% eddy current testing (ECT) of condenser tubes design?
Related Inspection Capabilities
Other capabilities in the same category.
100% dimensional inspection (CMM)
100% dimensional inspection (CMM) capability for titanium components
3D CMM inspection of spherical bearing housing bores
3D CMM inspection of spherical bearing housing bores capability for titanium components
3D CMM inspection
3D CMM inspection capability for titanium components
Ballistic testing (per NIJ/MIL-STD)
Ballistic testing (per NIJ/MIL-STD) capability for titanium components
Batch testing (mechanical + metallographic)
Batch testing (mechanical + metallographic) capability for titanium components
Charpy impact testing at -253C
Charpy impact testing at -253C capability for titanium components
Charpy impact testing at -253C for LH2 cryogenic hardware
Charpy impact testing at -253C for LH2 cryogenic hardware capability for titanium components
CMM alignment of hanger interface
CMM alignment of hanger interface capability for titanium components
CMM blade profiling
CMM blade profiling capability for titanium components
CMM contour inspection (+-0.2mm)
CMM contour inspection (+-0.2mm) capability for titanium components
CMM dimensional inspection (+-0.01mm)
CMM dimensional inspection (+-0.01mm) capability for titanium components
CMM dimensional inspection of contact spacing
CMM dimensional inspection of contact spacing capability for titanium components
One Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.