BOZE CNC Ti | Inspection

Ultrasonic inspection of clevis brackets

Ultrasonic inspection of clevis brackets capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
CMM envelope: 1200 × 1000 × 800 mm Thickness Range
Measurement uncertainty: +(1.0 + L/300) µm per ISO 10360 Cutting Tolerance
Measurement uncertainty: +(1.0 + L/300) µm per ISO 10360 Tolerance
Contact or non-contact (laser/white light) scanning Surface Finish
Titanium Bell Crank Rocker Arm Titanium Brake Caliper Mounting Bolt

What is Ultrasonic inspection of clevis brackets?

Ultrasonic inspection of clevis brackets capability for titanium components

NDT and dimensional inspection service for Ultrasonic inspection of clevis brackets, performed by certified technicians per applicable standards.

Engineering Parameters & Capabilities

Coordinate Measuring Machine (CMM) inspection provides quantitative dimensional verification of titanium components against GD&T specifications per ASME Y14.5. Touch-trigger probes, scanning heads, and non-contact laser sensors accommodate geometries from simple prismatic to complex freeform surfaces, specifically for brackets. Precision brackets for aerospace present unique challenges: complex organic geometry with multiple thin-wall lugs. 5-axis simultaneous machining is required to eliminate second op setup errors.

Parameter Specification
Probe Type Touch-trigger / scanning / non-contact laser
Uncertainty +(1.0 + L/300) µm per ISO 10360
GD&T Full: form, orientation, location, runout

Engineering Capabilities & Limits

NDT and dimensional inspection service for Ultrasonic inspection of clevis brackets, performed by certified technicians per applicable standards.

Hole Types Supported

N/A

Heat Control Measures

Temperature-controlled metrology lab at 20 ± 1°C. Components stabilized on granite surface plate for a minimum of 4 hours before measurement.

Flatness & Stress Relief

Granite surface plate Grade 00 (flatness < 1 µm/m) as reference datum.

Tolerance

Measurement uncertainty: +(1.0 + L/300) µm per ISO 10360

Typical Applications & Components

This process is used to manufacture the following titanium components.

Titanium Bell Crank Rocker Arm

Grade 5 Ti-6Al-4V Cycling / Bicycle

Titanium Brake Caliper Mounting Bolt

Grade 5 Ti-6Al-4V Cycling / Bicycle

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Inspection Report

Full FAIR (AS9102) with a graphical pass/fail color map.

CoC

Certificate of Conformance with material certification traceability.

CMM First Article Inspection

CMM First Article Inspection for ultrasonic inspection of clevis bracket components.

Surface Enhancement (Shot Peen)

Surface Enhancement (Shot Peen) for ultrasonic inspection of clevis bracket components.

Quality Assurance & Inspection

Inspection Items

  • Ultrasonic inspection of clevis brackets specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)
  • Fluorescent Penetrant Inspection (FPI) per ASTM E1417

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for Ultrasonic inspection of clevis brackets?
Ultrasonic inspection of clevis brackets can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with Ultrasonic inspection of clevis brackets?
Typical achievable tolerances for Ultrasonic inspection of clevis brackets are Measurement uncertainty: +(1.0 + L/300) µm per ISO 10360. Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to Ultrasonic inspection of clevis brackets?
All Ultrasonic inspection of clevis brackets operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for Ultrasonic inspection of clevis brackets projects?
Lead times for Ultrasonic inspection of clevis brackets vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my Ultrasonic inspection of clevis brackets design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related Inspection Capabilities

Other capabilities in the same category.

100% dimensional inspection (CMM)

100% dimensional inspection (CMM) capability for titanium components

100% eddy current testing (ECT) of condenser tubes

100% eddy current testing (ECT) of condenser tubes capability for titanium components

3D CMM inspection of spherical bearing housing bores

3D CMM inspection of spherical bearing housing bores capability for titanium components

3D CMM inspection

3D CMM inspection capability for titanium components

Ballistic testing (per NIJ/MIL-STD)

Ballistic testing (per NIJ/MIL-STD) capability for titanium components

Batch testing (mechanical + metallographic)

Batch testing (mechanical + metallographic) capability for titanium components

Charpy impact testing at -253C

Charpy impact testing at -253C capability for titanium components

Charpy impact testing at -253C for LH2 cryogenic hardware

Charpy impact testing at -253C for LH2 cryogenic hardware capability for titanium components

CMM alignment of hanger interface

CMM alignment of hanger interface capability for titanium components

CMM blade profiling

CMM blade profiling capability for titanium components

CMM contour inspection (+-0.2mm)

CMM contour inspection (+-0.2mm) capability for titanium components

CMM dimensional inspection (+-0.01mm)

CMM dimensional inspection (+-0.01mm) capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities