BOZE CNC Ti | Forming

Precision stamping + vibratory deburring of flat/lock washers

Precision stamping + vibratory deburring of flat/lock washers capability for titanium components

Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, Grade 9, Grade 23 Common Grades
0.3 mm – 6.0 mm sheet/plate Thickness Range
+0.2 mm (bend position) / +0.5° (bend angle) Cutting Tolerance
+0.2 mm (bend position) / +0.5° (bend angle) Tolerance
No surface damage with polyurethane tooling Surface Finish
Titanium Split-Ring Quick Flange Titanium Centering Ring (KF/ISO)

What is Precision stamping + vibratory deburring of flat/lock washers?

Precision stamping + vibratory deburring of flat/lock washers capability for titanium components

Metal forming capability for Precision stamping + vibratory deburring of flat/lock washers, with CNC press brake, die design, and springback compensation for titanium alloys.

Engineering Parameters & Capabilities

Press brake forming of titanium sheet uses CNC-controlled backgauges and variable-radius tooling to produce precision bends. Titanium's high springback (10–20° for Grade 5) requires over-bend compensation calculated from the specific alloy's elastic modulus.

Parameter Specification
Method CNC press brake with air bending / bottoming
Springback (Gr5) 10–20° depending on R/T ratio
Min Bend R 2×T (Grade 2) / 3×T (Grade 5)

Engineering Capabilities & Limits

Metal forming capability for Precision stamping + vibratory deburring of flat/lock washers, with CNC press brake, die design, and springback compensation for titanium alloys.

Hole Types Supported

N/A

Heat Control Measures

Hot forming at 300–600°C for complex bends using resistance-heated tooling. Temperature controlled +10°C across the bend line.

Flatness & Stress Relief

Post-form stress relief at 540°C for CP grades. Multi-stage forming with intermediate stress relief for tight radii.

Tolerance

+0.2 mm (bend position) / +0.5° (bend angle)

Typical Applications & Components

This process is used to manufacture the following titanium components.

Titanium Split-Ring Quick Flange

Grade 5 Ti-6Al-4V Semiconductor

Titanium Centering Ring (KF/ISO)

Grade 5 Ti-6Al-4V Semiconductor

Secondary Operations & Downstream Processing

Enhance your component with our integrated downstream services:

Stress Relief

Vacuum annealing to relieve cold-work stresses.

Laser Trimming

Fiber laser cutting of formed blanks to net shape.

Heat Treatment

Heat Treatment for precision stamping + vibratory deburring of flat/lock washers components.

OD/ID Grinding

OD/ID Grinding for precision stamping + vibratory deburring of flat/lock washers components.

Dye Penetrant Inspection

Dye Penetrant Inspection for precision stamping + vibratory deburring of flat/lock washers components.

Quality Assurance & Inspection

Inspection Items

  • Precision stamping + vibratory deburring of flat/lock washers specific dimensional verification (CMM / vision)
  • Material grade verification (PMI / OES spectrometer)
  • Fluorescent Penetrant Inspection (FPI) per ASTM E1417

Quality Standards & Certifications

  • ISO 9001:2015 — Quality Management System
  • AS9100D — Aerospace Quality Management
  • ASTM B265 — Titanium Strip, Sheet, and Plate Standard

Frequently Asked Questions

What titanium grades are suitable for Precision stamping + vibratory deburring of flat/lock washers?
Precision stamping + vibratory deburring of flat/lock washers can be performed on Grade 1, Grade 2, Grade 5 (Ti-6Al-4V), Grade 7, and other grades. The specific grade selection depends on the required mechanical properties, corrosion resistance, and end-use application requirements.
What tolerances can be achieved with Precision stamping + vibratory deburring of flat/lock washers?
Typical achievable tolerances for Precision stamping + vibratory deburring of flat/lock washers are +0.2 mm (bend position) / +0.5° (bend angle). Tighter tolerances may be possible depending on part geometry, material condition, and quantity. Our engineering team reviews each project to determine the optimal tolerance-cost balance.
What quality certifications apply to Precision stamping + vibratory deburring of flat/lock washers?
All Precision stamping + vibratory deburring of flat/lock washers operations are performed under ISO 9001:2015 — Quality Management System, AS9100D — Aerospace Quality Management, ASTM B265 — Titanium Strip, Sheet, and Plate Standard certified quality management systems. Full traceability documentation, material certifications (EN 10204 3.1), and inspection reports are provided with each shipment.
What is the typical lead time for Precision stamping + vibratory deburring of flat/lock washers projects?
Lead times for Precision stamping + vibratory deburring of flat/lock washers vary by complexity and quantity. Prototype quantities (1-10 units) can typically be completed in 3-7 business days. Production quantities require 15-25 business days. Rush orders are available for qualifying projects. Contact our sales team for a specific timeline.
Can you provide DFM feedback for my Precision stamping + vibratory deburring of flat/lock washers design?
Yes. We provide free Design for Manufacturability (DFM) analysis for all new projects. Simply upload your CAD file (STEP, DXF, or DWG format) and our engineering team will review your design and provide optimization suggestions within 24 hours.

Related Forming Capabilities

Other capabilities in the same category.

Custom fabrication to drawing

Custom fabrication to drawing capability for titanium components

Deep drawing of vacuum flask liners (Grade 1 Ti)

Deep drawing of vacuum flask liners (Grade 1 Ti) capability for titanium components

Seamless tube bending for backpack frames

Seamless tube bending for backpack frames capability for titanium components

Sheet stamping / chemical etching of flow fields

Sheet stamping / chemical etching of flow fields capability for titanium components

Tube bending of steam coils (mandrel bending to prevent collapse)

Tube bending of steam coils (mandrel bending to prevent collapse) capability for titanium components

Wire drawing & straightening

Wire drawing & straightening capability for titanium components

Wire drawing to precise diameter +-0.02mm

Wire drawing to precise diameter +-0.02mm capability for titanium components
About Boze Titanium Manufacturing Center

One Metal. One Focus. Infinite Precision.

Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.

Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.

AS9100D ISO 13485 ISO 9001 500+ Clients 15+ Years OEM/ODM
Learn About Us Request a Quote
Explore More: Material Specifications Industry Applications All Services Capabilities