Wire EDM of bearing retainer rings from cold-rolled beta strip
Wire EDM of bearing retainer rings from cold-rolled beta strip capability for titanium components
What is Wire EDM of bearing retainer rings from cold-rolled beta strip?
Wire EDM of bearing retainer rings from cold-rolled beta strip capability for titanium components
Wire and sinker EDM capability for Wire EDM of bearing retainer rings from cold-rolled beta strip, achieving burr-free results with multi-pass finishing strategy and submerged machining.
Engineering Parameters & Capabilities
Wire EDM uses a continuously traveling brass or coated wire electrode under precision CNC control to erode titanium along a programmed path. Submerged in deionized water dielectric, the process cuts intricate profiles and sharp internal corners that are impossible with conventional methods, specifically for rings. Precision rings for General and Aerospace applications present unique challenges: roundness tolerance ±0.01 mm on large diameter rings (> 300 mm) and heat treatment distortion management.
| Parameter | Primary Method | Alternative Method |
|---|---|---|
| Min Internal Corner R | 0.015 mm (wire radius) | 0.5 mm (milling) |
| Taper Angle | +30° (5-axis wire EDM) | 0° (straight cut) |
| Re-cast Layer | 1–5 µm; removable by etching | No re-cast layer |
Engineering Capabilities & Limits
Wire and sinker EDM capability for Wire EDM of bearing retainer rings from cold-rolled beta strip, achieving burr-free results with multi-pass finishing strategy and submerged machining.
Hole Types Supported
Heat Control Measures
Deionized water dielectric with < 5 µS/cm conductivity and temperature control (±0.5°C). Multi-pass roughing to finishing with decreasing energy settings.
Flatness & Stress Relief
Multi-pass cutting strategy and stress-relieved material for thin-walled components. Anti-vibration wire tensioning for tall cuts up to 300 mm.
Tolerance
+0.002 mm (positional) / +0.003 mm (profile)
Typical Applications & Components
This process is used to manufacture the following titanium components.
Secondary Operations & Downstream Processing
Enhance your component with our integrated downstream services:
Re-cast Layer Removal
Chemical etching or electropolishing is used to remove a 1–5 µm re-cast layer.
Surface Polishing
Micro-blasting or CNC polishing is used to achieve a surface roughness of Ra < 0.4 µm.
Heat Treatment
Heat treatment for wire EDM of bearing retainer rings from cold-rolled beta strip components.
OD/ID Grinding
OD/ID grinding for wire EDM of bearing retainer rings from cold-rolled beta strip components.
Dye Penetrant Inspection
Dye penetrant inspection for wire EDM of bearing retainer rings from cold-rolled beta strip components.
Quality Assurance & Inspection
Inspection Items
- Wire EDM of bearing retainer rings from cold-rolled beta strip specific dimensional verification (CMM / vision)
- Material grade verification (PMI / OES spectrometer)
- Fluorescent Penetrant Inspection (FPI) per ASTM E1417
Quality Standards & Certifications
- ISO 9001:2015 — Quality Management System
- AS9100D — Aerospace Quality Management
- ASTM B265 — Titanium Strip, Sheet, and Plate Standard
Frequently Asked Questions
What titanium grades are suitable for Wire EDM of bearing retainer rings from cold-rolled beta strip?
What tolerances can be achieved with Wire EDM of bearing retainer rings from cold-rolled beta strip?
What quality certifications apply to Wire EDM of bearing retainer rings from cold-rolled beta strip?
What is the typical lead time for Wire EDM of bearing retainer rings from cold-rolled beta strip projects?
Can you provide DFM feedback for my Wire EDM of bearing retainer rings from cold-rolled beta strip design?
Related EDM Capabilities
Other capabilities in the same category.
One Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze CNC Ti is the dedicated titanium manufacturing center of Baoji Boze Metal Products Co., Ltd.