Serviços de Extrusão de Titânio
Extrusão de precisão de titânio: perfis estruturais complexos, tubos de parede espessa sem costura, formas ocas multicanal. Prensa de 6.000 ton, comprimento de 12 m, envelope de ø 350 mm, AS9100D.
Read more Show less
Titanium Extrusion Espectro de Processos
Three integrated extrusion workflows covering the full titanium profile production spectrum — from hot extrusion of long-length structural profiles to precision post-processing and quality-certified delivery.
Hot Titanium Extrusion
6,000+ Ton Hot Extrusion of Long-Length ProfilesPushing pre-heated titanium billets (950-1050°C) through precision-ground die apertures at 6,000+ metric tons — producing long-length near-net profiles with aerospace-grade surface finish and dimensional accuracy.
- Near-net extrusion of complex asymmetric structural profiles
- Seamless tube and hollow section production through porthole and bridge dies
- Long-length straight profiles (up to 12 m) for structural and architectural applications
- Solid round, rectangular, and custom-shaped bars and rods
Post-Extrusion Processing (Drawing, Straightening, Sawing)
Precision Drawn & Cut-to-Length ProcessingExtruded titanium products requiring secondary drawing, straightening, and cutting-to-length for precision dimensional compliance. From near-net extruded blanks to finished machined components.
- Solid bars and rods in round, hexagonal, and custom cross-sections
- Seamless tube and pipe — ID/OD dimensions from 20 mm to 300 mm with wall thickness down to 2 mm
- Structural angles, channels, T-sections, and other architectural profiles
- Custom asymmetric profiles for aerospace and defense applications
Production Flexibility & Quality Assurance
Flexible Lot Sizes & Multi-Alloy CapabilityOur extrusion facility processes titanium alloys through dedicated die sets with glass-lubricated tooling — delivering near-net profiles that minimize downstream machining requirements and material waste.
- Small-to-medium production runs (500-5,000 kg per order) with flexible alloy changeover
- Titanium Grade 2, Grade 5 (Ti-6Al-4V), and Grade 9 (Ti-3Al-2.5V) — the most commonly extruded titanium alloys
- Surface finish as-extruded: Ra 1.6-3.2 µm (with glass lubrication) — suitable for direct use or minimal post-processing
- Full NDT capability: ultrasonic (UT), dye-penetrant (PT), and dimensional inspection for certification packages
Extrusion Painel de Capacidade
Our extrusion press capacity — press force, maximum profile lengths, billet pre-heat range, and extruded profile diameter limits.
Extrusion Press Force
Industrial-grade hydraulic extrusion press generating extreme, controllable force to push pre-heated titanium billets through precision-ground die apertures.
Max Linear Profile Dispatch
Pushing single-piece uninterrupted alloy structures up to 12 meters in length — accommodating full-length structural profiles without butt-welding or mechanical joining.
Pre-Heat Range
Billet heating in multi-zone controlled atmosphere furnaces ensures uniform temperature distribution prior to extrusion, preventing localized overheating or underheating.
Extruded Profile Diameter Range
Diameter range of extruded solid bars, tubes, and custom profiles — from small-diameter rods to large structural sections.
All specifications measured under controlled conditions per ISO 2768-m and AS9100D. Actual results depend on material grade, geometry complexity, and batch size.
Need to Compress Buy-to-Fly Scrap?
Enviar Plantas de Seção Transversal para Revisão Rápida
Upload your extruded profile cross-section drawings (STEP, IGES, PDF) with material grade, dimensional envelope, and annual volume projections for a comprehensive 24-hour extrusion feasibility assessment — including die design analysis, glass lubrication planning, press tonnage verification, and multi-tier pricing.
Enviar para Revisão de ExtrusãoOne Metal. One Focus. Infinite Precision.
Founded in 2011 in Baoji's Titanium Valley, BOZE Metal is dedicated exclusively to titanium — from raw material to precision engineering. AS9100D, ISO 13485 & ISO 9001 certified with 500+ clients across Aerospace, Medical & Motorsport industries, we deliver end-to-end precision titanium CNC machining with full material traceability from source to component.
Boze Titanium Manufacturing Center is operated by Baoji Boze Metal Products Co., Ltd.
Certifications verified by NADCAP and compliant with ASTM International titanium standards (B265, B348, B381, F136, F2924) and ISO 13485 medical-device QMS.